Exhaust pipes must never be fitted pointing downwards or horizontally so that fumes are discharged directly through the external wall.
08. INSTALLATION
HANDLING AND UNPACKING
When transporting do not position the product horizontally. Unloading of the product must be performed using lifting means that are suitable and that have
characteristics that are consistent with the weight of the stove. The operator must make sure that during offloading and lifting of the stove there are no persons or
objects nearby. When unpacking, avoid damaging the product with cutters or blunt tools. Keep the packaging out of the reach of children. Remove the screws of
the brackets holding the product to the pallet and put it in position taking care to avoid anything that may block installation or damage the product. Use a lifter or
pallet truck to separate the apparatus from the transport pallet using the appropriate opening on its base.
Pay attention to the balance of the product given its size and weight.
PLACE OF INSTALLATION
The ARIA 50 pellet stove must be installed in the TECHNICAL ROOM. The technical room must have characteristics suitable for installation of the product: the
support surface must support the weight of the product, it must not be made of flammable material and it must be levelled. Observe the safety distances described
above. READ THE PROVISIONS APPLICABLE IN EACH COUNTRY REGARDING INSTALLATION.
In compliance with current regulations for installation, the pellet stove must be placed in a ventilated area where sufficient air flows to ensure correct combustion
and therefore efficient operation. The room must have a volume of no less than 100 m³ and, in order to ensure good combustion,
(40 m³/h of air) a “combustion air intake” is required, which must reach an external wall or a wall of an adjacent room with external ventilation, provided they are
equipped with an outside air intake and are not bedrooms or bathrooms or, where there is a fire hazard such as sheds, garages, storerooms for combustible
materials, etc. These air intakes must be created in such a way that they cannot be obstructed neither from the inside nor from the outside and must be protected
with grilles, wire mesh or suitable guards, provided that they do not reduce the minimum cross section.
When in operation, pellet stoves can create negative pressures in the rooms where they are installed. Other naked flame equipment must, therefore, not be present
in the same room (except only type C (watertight) boilers, unless they have their own air supply).
They must not be positioned close to curtains, armchairs, furniture or to other flammable materials.
They must not be installed in explosive or potentially explosive environments which may become explosive due to the presence of machinery, materials or dust
that can cause greenhouse gas emissions or which can easily ignite with sparks. Before starting to install the pellet stove, bear in mind that all the finishes or any
beams in flammable material must be positioned at a safe distance and outside the area of irradiation of the product itself. Also bear in mind that to avoid
compromising correct operation of the appliance it is essential to create a recirculation of air inside its housing, which prevents overheating. This is possible by
observing minimum distances and by creating ventilation holes.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Eva Calor ARIA 50 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Eva Calor ARIA 50 in the language / languages: English as an attachment in your email.
The manual is 7.33 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
