INSTALLATION USING A WALL FLUE GAS OUTLET IS PROHIBITED. THE FUME OUTLET MUST BE OF A ROOF-TYPE AS PROVIDED FOR BY
NATIONAL REGULATIONS.
Eva Stampaggi S.r.l. assumes no responsibility for injury to persons and/or damage to property caused by the non-observance of the point
highlighted above
for non-compliant installed products.
Install the stove according to the regulations in force in the country of use.
In Italy, for example, this refers to UNI 10683: 2012, which refers to 4 areas:
a. preliminary activities – are under the jurisdiction and are the responsibility of the reseller/installer at the time of the pre-installation inspection. Preliminary
procedures include:
•installation site suitability check;
•fume evacuation system suitability check;
•external air inlet suitability check.
At this stage, the product needs to be checked in order that it can be safely operated and that the relevant technical specifications are met.
The safety conditions must be assessed with a preventive inspection.
Stoves and fireplaces are heating systems and as such must be installed safely and according to the manufacturer's instructions!
b. Installation – responsibility of the installer. In this phase, installation of the item and the fume evacuation system are considered as well as the handling
such topics as:
•Safety distances from combustible materials;
•chimney flue construction, fume ducting, intubated systems and chimney cowls.
c. Release of additional documentation – responsibility of the installer.
The release of technical documentation must include:
•Manual of use and maintenance of the appliance and of the components of the system (e.g. fume ducts, chimney flue, etc.);
•Photocopy or photograph of the chimney flue plate;
•System manual (if applicable);
•Declaration of Conformity in relation to Ministerial Decree 37/08
d. Control and maintenance – the responsibility of the maintenance technician who will have to deal with the care and maintenance of the product during its
use over time.
The operator responsible for checking and maintaining the systems for winter and summer climate control carries out tasks in a workmanlike manner and in
observance of applicable regulations. The operator, at the termination of these procedures, must draw up and sign a technical inspection report in accordance with
the models provided by the provisions of the decree and the implementation rules, in relation to the type and heat output of the system, to be issued to the person
who signs a copy, thereby confirming receipt and reading thereof.
FOR INDUSTRIAL USE (in Italy)
Fire regulations must be observed: appliances fall under ACTIVITY 74 and thus under Italian Ministerial Decree 28/04/2005.
(Approval of the technical fire prevention regulations for the design, construction and operation of heating systems powered by liquid or gaseous
fuels).
Eva Stampaggi S.r.l. assumes no responsibility for injury to persons and/or damage to property caused by the non-observance of national
fire prevention regulations.
05.2 ARIA 50
FOR INDUSTRIAL USE (in Italy)
Fire regulations must be observed: appliances fall under ACTIVITY 74 and thus under Italian Ministerial Decree 28/04/2005.
(Approval of the technical fire prevention regulations for the design, construction and operation of heating systems powered by liquid or gaseous
fuels).
Eva Stampaggi S.r.l. assumes no responsibility for injury to persons and/or damage to property caused by the non-observance of national
fire prevention regulations.
06. FLUE PIPE
The flue pipe is one of the key features for guaranteeing the proper functioning of the stove. Thanks to the quality of
the materials, the strength, the durability, the easy cleaning and maintenance, the best flue pipes are made of steel,
either stainless steel or aluminised.
•In order to facilitate connection to the rigid steel flue, it is advisable to use telescopic fittings which, in addition to
facilitating the procedure, also compensate for the thermal expansion of both the firebox and the flue itself.
•It is advisable to seal the flue pipe at the end of the appliance with silicone resistant to high temperatures
(1,000°C). Should the existing flue opening not be perfectly perpendicular to the firebox fume outlet, use an elbow
to connect them. The angle with respect to the vertical, must never exceed 45° (see figure to the side) and there
can be no bottlenecks.
•No constrictions. Use 10cm-thick insulating thimbles if pipe vent passes through floors.
•The flue pipe must be insulated along its entire length. The insulation will make it possible to maintain a high
fume temperature. To optimise the draught, avoid condensation and reduce deposits of unburnt particles on the
walls of the flue. Use proper insulating materials (glass wool, ceramic fibre, Class A1 non-combustible materials).
•The flue must be weatherproof and must not make more than two changes of direction.
•Flexible and length-adjustable metal pipes may not be used.
EXISTING FLUE PIPE (TRADITIONAL)
THE PRODUCTION OF STOVES WITH HIGHER PERFORMANCE IS INCREASINGLY REQUIRED SO IT IS BECOMES
ESSENTIAL TO ENSURE THAT INSTALLATIONS COMPLY WITH THE LAW. IF THE FLUE PIPE PASSES THROUGH
NON-HEATED ENVIRONMENTS, IT MUST BE INSULATED FOR CORRECT COMBUSTION.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Eva Calor ARIA 50 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Eva Calor ARIA 50 in the language / languages: English as an attachment in your email.
The manual is 7.33 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
