678131
17
Zoom out
Zoom in
Previous page
1/21
Next page
– 17–
6.3 Konfiguration
6.4 Multilevel Sensor
Spirit Z-Wave Plus kann während der Laufzeit konfiguriert werden.
Die vom Spirit Z-Wave Plus gemessene Raumtemperatur wird automatisch bei einer Änderung von ±0,5°C
gesendet. Der Schwellwert kann konfiguriert werden.
Parameter
Nummer
Größe in
Bytes
Name Beschreibung
1 1 LCD invertieren 0x00 LCD-Inhalt normal
0x01 LCD-Inhalt gespiegelt
default: 0x00
2 1 LCD Timeout 0x00 Kein Timeout LCD immer an
0x05-0x1E Timeout nach 5 Sekunde – 30 Sekunden
default: 0x00
3 1 Hintergrund-
beleuchtung
0x00 Kein Backlight
0x01 Backlight aktiviert
default: 0x01
4
1
Batteriestatus 0x00 Batteriestatus nur eventgesteuert als Systemwarnung senden
0x01 Batteriestatus 1x täglich senden
default: 0x01
5 1 Ist-Temperatur 0x00 Ist-Temperatur nicht automatisch senden
0x01 – 0x32 0x32 Bei Temperaturdifferenz von 0,1°C – 5,0°C
Ist-Temperatur übertragen
default 0x05 (Bei Delta = 0,5°C melden)
6 1 Ventilöffnungs-
grad
0x00 Ventilöffnungsgrad nicht automatisch senden
0x01-0x64 Ventilöffnungsgrad bei Delta von 1% - 100% melden
default 0x00
7 1 Fensteroffen
Erkennung
0x00 Deaktiviert
0x01 Empfindlichkeit niedrig
0x02 Empfindlichkeit mittel
0x03 SEmpfindlichkeit hoch
default: 0x02 mittel
8 1 Ist-Temperatur-
Offset
0xCE-0x32 -5,0°C – (+)5,0°C
0x80 Temperatur wird extern bereitgestellt
default: 0x00 0,0°C Offset
Report outgoing:
Sensortyp: „Air Temperature“
Skalierung: Celsius
Genauigkeit: 2 Nachkommastellen
Report incoming:
Sensortyp: „Air Temperature“
Skalierung: Celsius and Fahrenheit
Genauigkeit: 0, 1 and 2
Die die vom Spirit Z-Wave Plus gemessene Raumtemperatur kann über einen Offset justiert werden.
Spirit Z-Wave Plus kann gemessene Temperaturen von anderen Z-Wave Geräten (z.B. einem Wandthermostat)
empfangen und diese Temperatur zur Raumtemperaturregelung verwenden. Diese Funktion muss per Konfigu
-
rations-Befehlsklasse aktiviert werden. Folgende Werte werden akzeptiert:
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurotronic Spirit Z-Wave Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurotronic Spirit Z-Wave Plus in the language / languages: German as an attachment in your email.

The manual is 1,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eurotronic Spirit Z-Wave Plus

Eurotronic Spirit Z-Wave Plus Quick start guide - English, German - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info