532088
2
Zoom out
Zoom in
Previous page
1/3
Next page
9
Installation
SPARmatic comet can be quickly and easily moun-
ted on all common valves (see adapter table).
It can be installed without grime and water spots
because the heating circuit is not interrupted.
1. Turn the manual thermostat head up
completely, loosen the fastening and
pull the thermostat off of the valve.
2. Use an appropriate adapter, if required,
and push it onto the valve.
3. Screw the connector on the valve
or the adapter.
4. Now, you put SPARmatic comet on the
connector until it noticeably clicks into place.
Additional information about the different
adapters are provided on page 20 or at:
www.eurotronic.org
SPARmatic-comet-BAL-en-DinA7-1c-20100817.indd 9 17.08.10 12:16
13
Setting heating and economy times
With SPARmatic comet it is possible to set 4 heating
and 4 economy times per day – one for each day or
one for a block of several days.
TAG1 to TAG7 represent the weekdays from Mon-
day to Sunday. Additionally, the corresponding days
are shown as abbreviation below the menu bar on
the display.
Block construction:
T1–5 = same programme from Monday to Friday
T
1–6 = same programme from Monday to Saturday
T 17 = same programme from Monday to Sunday
For non-programmed days the factory preset
remains active.
Setting of an individual programme:
Press
MENU
. Select the menu item with the
selector wheel. Press
OK
.
for Monday is shown on the display.
Select day/block with the selector wheel.
Conrm with
OK
.
Set the beginning of the 1
st
heating time (symbol )
with the selector wheel. Conrm with
OK
.
Set the beginning of the 1
st
economy time (symbol )
with the selector wheel. Conrm with
OK
.
SPARmatic-comet-BAL-en-DinA7-1c-20100817.indd 13 17.08.10 12:16
10
In case of a later installation, please switch
in the menu to
before you install the
device. Herewith the installation is facilitated.
Dismounting
In order to dismount SPARmatic comet press
the releasing device to loosen the locking de-
vice. Now, pull the SPARmatic comet off of the
valve.
SPARmatic-comet-BAL-en-DinA7-1c-20100817.indd 10 17.08.10 12:16
14
Now, if desired, a 2
nd
, 3
rd
or 4
th
heating/economy
time can be entered.
- If you do not want to set a further heating/eco-
nomy time conrm
with
OK
.
The next day for programming is shown on the dis-
play.
If you do not want to enter a further day, leave the
menu with
MENU
. If the temperature is shown on
the display the programming is nished.
Within the blocks you can also overwrite single
days with differing times.
Setting comfort and economy
temperature
Press
MENU
. Select the menu item with the
selector wheel. Conrm with
OK
. Set comfort
temperature with the selector wheel. Conrm with
OK
. Set the economy temperature with the selec-
tor wheel. Conrm with
OK
.
Area
: 8°C, freeze protection function is active
Area : valve is completely open
SPARmatic-comet-BAL-en-DinA7-1c-20100817.indd 14 17.08.10 12:16
11
Adaptation
Initial installation: Press the button
OK
until
appears on the display so that SPARmatic comet
will be able to start its adaptation. The device will
adapt itself to the stroke of your valve body. To do
this the valve will now be opened and closed seve-
ral times to store the end points.
In some cases this process can take a few minu-
tes. After successful adaptation it returns to normal
mode.
Should adaptation become necessary again,
e.g. if your radiator does not cool down in the
-Position, please press in the menu the
button
until adaptation starts again.
If the mistake
is shown on the display place
SPARmatic comet onto the radiator valve and
then take the batteries out for a short time in
order to execute a reset.
SPARmatic-comet-BAL-en-DinA7-1c-20100817.indd 11 17.08.10 12:16
15
By the way: Maximum energy saving can be
obtained with an economy temperature which
is about 5 ˚C below the comfort temperature.
Manual operation
With the selector wheel an adaptation of the room
temperature is possible at any time. In the AUTO-
mode it remains active until the next switch point
is reached. Now, the usual programme becomes
active again.
Further functions
Timer function
The timer function is selected with the timer-button
. With this function a user-dened tempera-
ture for a programmable period can be entered.
This can be very useful in case of a party, for ex-
ample. Press
. First, the time for which the
time programme has been deactivated is shown.
Conrm with
OK
. Now, the desired temperature
can be set. Conrm with
OK
.
SPARmatic-comet-BAL-en-DinA7-1c-20100817.indd 15 17.08.10 12:16
12
Basic operating modes
MANU-mode
In the MANU-mode SPARmatic comet adjusts to
the manually specied temperature.
AUTO-mode
In the AUTO-mode SPARmatic comet changes
between to temperatures according to the time
programme that has been set:
comfort temperature (factory preset 21°C)
economy temperature (factory preset 16°C)
The heating and economy times can be specied
via the adjustable time programme. It is possible
to set 8 switch points (4 heating and 4 economy
times) per day at the most. SPARmatic comet has
the following factory preset:
Heating time:
Heating with comfort temperature
(factory preset: 1
st
heating time at 07:00)
Economy time:
lowering to economy temperature
(factory preset: 1
st
economy time at 22:00)
SPARmatic-comet-BAL-en-DinA7-1c-20100817.indd 12 17.08.10 12:16
16
Offset
If the perceived temperature signicantly differs
from the set thermostat temperature a temperature
set up can be executed.
Press
MENU
. Select the menu item with the
selector wheel. Conrm with
OK
. The degree
setting
will ash on the display. Now, set up
the desired adaptation for the temperature (from -5
up to +5°C) with the selector wheel. Conrm your
entry with
OK
. The temperature display does not
change!
Window function
If you open a window and consequently the tempe-
rature drops signicantly, SPARmatic comet will
automatically close the heating valve in order to
save energy. The display will show
. Afterwards,
SPARmatic comet will resume normal operation.
For the set up select
in the menu. Conrm
with
OK
. First, the sensibility is selected with the
selector wheel (
= high sensibility, = medi-
um sensibility (factory preset),
= low sensibili-
ty). Conrm with
OK
. Now, you enter the time (10
min (factory preset) - 60 min) for which the valve
should remain closed. Conrm with
OK
.
SPARmatic-comet-BAL-en-DinA7-1c-20100817.indd 16 17.08.10 12:16
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurotronic Sparmatic Comet at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurotronic Sparmatic Comet in the language / languages: English as an attachment in your email.

The manual is 2,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eurotronic Sparmatic Comet

Eurotronic Sparmatic Comet User Manual - German - 3 pages

Eurotronic Sparmatic Comet User Manual - Dutch - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info