775260
79
Zoom out
Zoom in
Previous page
1/172
Next page
USER MANUAL
CW QUICK COUPLERS FOR EXCAVATORS
TRANSLATION FROM DUTCH ORIGINAL
Eurosteel BV Van Heemskerckweg 10 5928 LL Venlo The Netherlands +31 (0)77 387 60 60 www.eurosteel.nl
- 77 -
- 77 -
USER MANUAL
CW QUICK COUPLERS FOR EXCAVATORS
TRANSLATION FROM DUTCH ORIGINAL
5.2.3 UNCOUPLING AN ATTACHMENT FROM THE OPTIONAL GRAPPLE SUSPENSION
1. After completing steps 1 to 3 in Section 5.2, go to step 2.
2. Lower the attachment to be uncoupled so that it is flat and stable. Make sure that the attachment can
be uncoupled without anyone being on or below the CW quick coupler or the attachment.
3. Switch off the excavator.
4. Disconnect any hoses or cables between the attachment and the excavator. Make sure that couplings
and plugs are put away clean and undamaged.
IT IS PROHIBITED TO BE ON OR BELOW THE CW QUICK COUPLER OR ATTACHMENT WHILE
UNOUPLING THE ATTACHMENT FROMTHE GRAPPLE SUSPENSION.
5. Remove the coupling pin and uncouple the attachment from the grapple suspension.
5.3 HOISTING
Hoisting is only permitted with the original, optional lifting hook or a hoist that can be connected to the CW quick
coupler. If a hoist is coupled to the CW quick coupler, or hoisting work carried out with the optional lifting hook,
the instructions below must be followed.
IT MAY BE THE CASE THAT IF THE LIFTING HOOK IS USED OR A HOIST IS COUPLED TO AN EXCAVATOR,
THE FUNCTION OF THE EXCAVATOR CHANGES FROM EXCAVATOR TO HOISTING MACHINE, AND IS
THEREFORE SUBJECT TO THE TECHNICAL REQUIREMENTS AND SAFETY REQUIREMENTS APPLICABLE
TO A HOISTING MACHINE. CONSULT YOUR MACHINE SUPPLIER FOR MORE INFORMATION.
1. Follow the excavator manufacturer’s hoisting instructions.
2. The safety requirements in Section 2 must be complied with before starting any lifting work.
3. The lifting hook may only be used if no attachment is connected to the CW quick coupler or optional
grapple suspension.
4. If a hoist is coupled to the CW quick coupler, first read the hoist's instructions before proceeding to step
5.
5. Check the lifting hook as specified in Section 6 of this manual.
6. Check that other lifting equipment, such as hoisting belts, chains, cables, links and locks, has been tested
and is suitable for the load to be lifted.
7. Place the excavator in a flat and stable position before hoisting starts.
8. The lifting hook may only be loaded in the green zone and direction indicated in Section 1.4.1, Figure 5.
The lifting hook must never be loaded laterally in any circumstances!
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurosteel CW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurosteel CW in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 14.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info