775260
75
Zoom out
Zoom in
Previous page
1/172
Next page
USER MANUAL
CW QUICK COUPLERS FOR EXCAVATORS
TRANSLATION FROM DUTCH ORIGINAL
Eurosteel BV Van Heemskerckweg 10 5928 LL Venlo The Netherlands +31 (0)77 387 60 60 www.eurosteel.nl
- 73 -
- 73 -
USER MANUAL
CW QUICK COUPLERS FOR EXCAVATORS
TRANSLATION FROM DUTCH ORIGINAL
5.2 UNCOUPLING ATTACHMENT
Attachments may only be uncoupled from the operating position of the excavator. Follow the instructions
below. If in doubt, contact the supplier of the CW quick coupler.
1. Before any work on uncoupling the attachment begins, the safety regulations in Section 2 must be
complied with.
2. Make sure the excavator is level and stable.
3. To uncouple a attachment from the CW quick coupler, proceed to step 4. To uncouple a attachment
from the optional grapple suspension, go to Section 5.2.3.
4. Disconnect any hoses or cables between the attachment and the excavator. Before doing this, switch
off the excavator and make sure that the couplings and plugs are put away clean and undamaged.
5. Position the attachment in a way that
relieves any load on the locking wedge, and
allows the attachment to remain suspended
on the machine when the lock is opened. This
is shown in Figure 26.
6. To uncouple a attachment from a hydraulic
CW quick coupler, follow the steps in Section
5.2.1. For a mechanical or spindle version,
follow the steps in Section 5.2.2.
BEFORE UNLOCKING STARTS, POSITION THE
ATTACHMENT IN A WAY THAT PREVENTS IT
BECOMING DETACHED FROM THE CW
QUICK COUPLER WHEN THE LOCKING
WEDGE IS UNLOCKED.
5.2.1 UNCOUPLING HYDRAULIC VERSION
1. Continue after steps 1 to 6 in 5.2 have
been completed.
2. Unlock the locking wedge as shown in
Figure 27. Operate the locking wedge
cylinder from the operating position in the
excavator according to the hydraulic
control system instructions.
Figure 26
Figure 27
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurosteel CW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurosteel CW in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 14.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info