775260
69
Zoom out
Zoom in
Previous page
1/172
Next page
USER MANUAL
CW QUICK COUPLERS FOR EXCAVATORS
TRANSLATION FROM DUTCH ORIGINAL
Eurosteel BV Van Heemskerckweg 10 5928 LL Venlo The Netherlands +31 (0)77 387 60 60 www.eurosteel.nl
- 67 -
- 67 -
USER MANUAL
CW QUICK COUPLERS FOR EXCAVATORS
TRANSLATION FROM DUTCH ORIGINAL
5.1.2 COUPLING THE MECHANICAL OR SPINDLE VERSION
1. After completing steps 1 to 6 in Sections 5 and 5.1, continue to step 2.
2. Position the CW quick coupler in such a way that the locking wedge can be removed or the spindle
operated without anyone being on or below the CW quick coupler.
3. Switch off the excavator.
4. Unlock the mechanical version according to the instructions below in 4A, and the spindle version
according to the instructions below in 4B.
IT IS PROHIBITED TO BE ON OR BELOW THE CW QUICK COUPLER OR ATTACHMENT WHILE UNLOCKING
OR REMOVING THE LOCKING WEDGE.
4A. Mechanical version
The locking wedge must be completely removed. The locking wedge can weigh up to 45 kg, so depending
on the type of CW quick coupler it must be removed by 2 people. Remove the locking wedge by
loosening the locking bolt(s) (see Section 1.3.2). See Table 6 Table 5 on page 69 for the weights of the
locking wedge and specifications of the locking bolt(s)
4B. Spindle version
Remove the locking bolt (see Section 1.3.3) and rotate the spindle out until the locking wedge is fully
extended.
5. Retract the bucket cylinder, and position the
CW quick coupler in front of the attachment
as shown in Figure 20. The attachment must
be positioned in such a way that the coupling
points for the front shaft are at the top and
are clearly visible.
IN CASE OF A MECHANICAL VERSION, THE LOCKING WEDGE MUST BE FULLY REMOVED. IN CASE OF
A MECHANICAL VERSION, CHECK THAT THE LOCKING WEDGE IS FULLY RETRACTED.
Figure 20
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurosteel CW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurosteel CW in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 14.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info