775260
61
Zoom out
Zoom in
Previous page
1/172
Next page
USER MANUAL
CW QUICK COUPLERS FOR EXCAVATORS
TRANSLATION FROM DUTCH ORIGINAL
Eurosteel BV Van Heemskerckweg 10 5928 LL Venlo The Netherlands +31 (0)77 387 60 60 www.eurosteel.nl
- 59 -
- 59 -
USER MANUAL
CW QUICK COUPLERS FOR EXCAVATORS
TRANSLATION FROM DUTCH ORIGINAL
4 MOUNTING
A CW quick coupler is only designed to act as a link between an excavator and an attachment. The CW quick
coupler may only be mounted on the excavator specified on the nameplate. If a quick coupler adapter is present,
the CW quick coupler may only be used on the quick coupler specified on the nameplate.
ALL INSTRUCTIONS AND WARNINGS LISTED IN SECTION 2 AND 2.1 MUST BE RESPECTED BEFORE
STARTING WORK WITH OR ON THE CW QUICK COUPLER.
THIS CW QUICK COUPLER IS CE APPROVED. CW QUICK COUPLERS MAY ONLY BE COUPLED TO A
MACHINE IF THE ENTIRE MACHINE AND ANY ATTACHMENTS TO BE COUPLED BEAR CE APPROVAL.
4.1 MOUNTING ON EXCAVATOR
A CW quick coupler designed for mounting to a machine has excavator-specific attachment points. The
nameplate indicates the machine for which these attachment points are suitable. For more, see Section 1.1. The
CW quick coupler must be mounted on the excavator by skilled personnel. Mount the CW quick coupler to the
excavator in accordance with the instructions below.
1. Mount the CW quick coupler in a clean, safe environment.
2. Place the CW quick coupler in front of the excavator, and use
the excavator to position the H-link between and in line with
the rear mounting points (see 1 in Figure 9). Insert the
machine pin together with any O-rings and shims.
3. Position the arm between and in line with the front mounting
points (see 2 in Figure 9), and insert the machine pin together
with any O-rings and shims.
4. Fit the original excavator pins and any O-rings and shims
according to the machine manufacturer’s instructions.
ONLY CHECK ALIGNMENT VISUALLY, NEVER WITH YOUR
FINGERS
5. Secure the original excavator pins in the designated locking points on the CW quick coupler as specified
by the excavator manufacturer (see 3 in Figure 9 as an example).
6. Lubricate the excavator pin mounting points and other lubrication points. If necessary, consult the
excavator manufacturer’s instructions.
7. Carefully extend and retract the bucket cylinder to its limits, checking that the CW quick coupler does
not touch the excavator at the same time. Contact your CW quick coupler supplier immediately if the
bucket touches the excavator.
8. In the case of a hydraulic version, go to Section 4.3 for an explanation of connecting the CW quick
coupler to the designated hydraulic circuit on the excavator.
2
1
3
Figure 9
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurosteel CW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurosteel CW in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 14.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info