1. Fan blade
2. Motor axle
3. Display housing
4. Display
5. Upper support pipe
6. Nut for height adjustment
7. Lower support pipe
8. Plastic ornamental ring
9. Front protective grill
10. Locking system for the grill
11. Control panel
12. Base
13. Base weight
14. Rear protective grill
15. Motor housing
16. Tilt support plate
17. Side panel
18. Cable with coiled cord
19. Screw with plastic grip
Assembling XVT-16S
Step 1 Remove the packing material and keep it away from children.
Step 2 Before continuing, check that the plug is not plugged into the socket and
the control button is on ‘0’ (off).
Step 3 Remove the nut for height adjustment on the support pipe by turning it
counter-clockwise.
Step 4 Place the plastic ornamental ring onto de support pipe and return the nut
for height adjustment to its proper place.
Step 5 Mount the weighted foot with a round disc firmly to the support pipe using
the ‘L’ screw
Step 6 Place the motor housing (including the display housing) onto the support
pipe attached to the assembled base and secure it with the screw with the
plastic handgrip.
For mounting the fan blade and the protective grill, see assembly XVT-16 from step
1.
Operating the XVT-16
Use the fan only when:
The fan is completed assembled;
All the connections are tightened firmly;
All the safety instructions have been observed;
The fan is positioned on a stable and flat ground.
Check whether the fan speed is set to .
Set the fan in the correct position.
Insert the plug into an appropriate socket.
Use the control button to choose the desired speed ( off, low,
medium, turbo, silent).
The fan will start operating and the LED lighting will turn on.
If necessary, press the oscillation (swivel) knob (6): the fan will now swivel in
an angle of 45°. By pulling out this knob, you stop the oscillation (swivel)
function.
To switch off the fan, set the On/Off button to 0 (off). If you want to disrupt
the operation for longer than a few minutes, then also remove the plug form the
socket.