Step 13 Close the transparent locking flap and
secure this flap with the supplied
screw.
Step 14 Insert (9) the supplied adapter with the
connecting plug fan side into
the plastic base (7).
Step 15 Place 2 pieces AAA batteries (not
included) in the remote control.
Step 16 Set the fan to the desired height (length
84 or 109 cm).
Operation
Do not start using the fan until:
- All packaging is removed and places away from children
- All safety instructions have been observed
- The fan is places on a stable flat surface
Put the fan in the correct position and desired height.
Insert the plug into a suitable socket. The red light on the control panel lights
up.
Press the ON/OFF button. The red light changes from red to green, the fan starts
to run at the pre-set speed of about 850 rpm. The speed button lights up.
Select the required mode on the control panel or the remote control.
The control panel and the remote control have the similar functions.