Manual Eurom Sunblast (page 33 of 48) (English, German, Dutch, French)

702565

Zoom out

Zoom in

1/48

The fan does not work while

the plug is in the socket and

the switch is positioned on

ON. The lamp flickers and

the display shows ‘E1’ or

‘E2’.

1 – Thermostat is set too low

2 – The electrical connection

of the print plate / motor is

broken

1 – Set the thermostat to a higher

temperature

2 – Check all the electrical connections

See wiring diagram

Poor burning and/or lots of

soot is created

1 – Fuel filter is dirty

2 – Poor quality fuel

1 – Clean/replace fuel filter

2 – Check whether the fuel is not dirty

or old

The heater does not start

and the lamp is not burning.

1 – Heater is over-heated

2 – The device is not receiving

any power

3 – The fuse is burnt out

4 – Poor electrical connection

between the temperature

limiter

and the print plate

1 – Switch the device OFF

for at least 10 minutes and let it cool

down.

Then switch ON the device once

again.

2 – Check the socket, electricity cord

and if necessary, the extension

cord.

3 – Check/replace the fuse

4 – Check all the electrical connections

See wiring diagram

Error messages:

E0: No power. Ensure the correct supply of power.

E1 and E2: Contact a qualified technician for repairs.

E3: The thermostat has switch off the device. After cooling down sufficiently, the device will restart

automatically.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Sunblast in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eurom Sunblast Manual

Product: