Manual Eurom SPV550 (page 13 of 28) (English, German, Dutch, French)

591571

Zoom out

Zoom in

1/28

If there is insufficient supervision of a pump that is functioning automatically, the pump may

break down despite the presence of the overheating safeguard. The user is always responsible

for supervising the device!

MAINTENANCE

Before you carry out checking or cleaning tasks on the pump you must switch it off and

remove the plug from the socket.

Your submersible pump is more or less maintenance-free. The only tasks you must carry out

are as follows:

 Carry out a regular visual inspection. Make sure the pump is not damaged. Check the

electrical cable, the plug, the float switch and the float cable for damage too. If you discover

damage, you must take the device to your supplier or an accredited professional. Never

attempt to carry out repairs yourself and never open the pump!

 Regularly check that the float switch is working effectively, particularly if you have set the

pump to work automatically.

 Regularly remove residues from the float with clean water.

 Regularly check (by putting your fingers into the suction openings) whether any dirt (fibres,

residues) has accumulated around the blade. Remove it if this is the case. If you cannot do

so, take the pump to your supplier or to an accredited professional to open the device and

remove the residue.

 If you regularly use the pump at different locations, you must rinse with clean water (inside

and out) after each use.

 Keep the base of the well (or the tile on which the pump is positioned) free from mud and

residue.

 Ensure that the pump does not freeze. Before winter sets in, run the pump dry and store it in

a frost-free location.

DEFECTS – CAUSES – SOLUTIONS

Defects

Causes

Solutions

Pump does not start

- No electricity

- Float does not switch

- Check electrical supply

- Place the float in a higher position

Pump runs but does

not pump water

- Inlet openings are clogged

- Water drainage pipe is bent or

hose is blocked

- Air around the blade

- Blade is jammed

- Water level is too low (manual

usage)

- Clean them

- Straighten the hose or remove the

blockage

- Switch the pump off and move it from

side to side. Wait until the air has

escaped and switch on again

- Try to remove the blockage or ask a

professional to do so

- Submerge the pump in deeper water

Pump does not switch

off

- Float cannot sink

- Give the float more space

Insufficient water

- Inlet openings are (partially)

blocked

- Too little pumping capacity due

to contamination and dirty

water

- Clean them

- Clean the pump and replace worn

out parts

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eurom SPV550 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eurom SPV550 Manual

Product: