672718
16
Zoom out
Zoom in
Previous page
1/40
Next page
16
Set-up and Operation
Press the control knob to ON. The light on the button will come on and one
quartz lamp will work at half power (450W).
If you wish, switch on the second lamp in the same way (900W full power).
In order to switch both lamps off again, turn the relevant button back to OFF. The
light will go out. The heater is now off. Then remove the plug from the socket.
Never leave the heater plugged in when it is not in use!
Please note: When you use the heater for the first time, a little smoke and an
odour may be produced. This is normal and harmless, and should cease after a
few minutes. If the heater does not stop smoking, switch the heater off, remove
the plug from the socket and contact your supplier.
The heater, and particularly the radiation grid, become extremely hot during use
and will also remain warm for some time after the heater has been switched off.
Do not fold in the base until the heater has cooled down fully!
If you wish to relocate the heater, first switch it off, remove the plug from the
socket and allow it to cool down before moving it. To relocate the heater, use the
handle at the top.
In order to prevent over-heating, never cover the heater!
WARNING! Some parts of this product could become very hot and cause
burns. Be especially careful if children or vulnerable persons are in the
immediate vicinity.
Safety features
The heater is fitted with a tipping safeguard which automatically shuts off the
appliance if it inadvertently falls over. However, this does not rule out all risks: even
after the heater has been switched off, it and particularly the radiation grid, will
remain very hot for some time and if it is left lying, for example, on a wooden floor or
carpet, it can cause fire/melting/scorching damage and result in a fire. Therefore
remain cautious at all times!
When the heater is returned to its upright position, it will resume functioning as
normal but, before reusing, switch off, unplug and check for damage. Do not use the
heater if it is damaged or malfunctioning, but have it inspected/repaired!
Cleaning and Maintenance
Keep the heater clean. Deposits of dust and dirt in the appliance are a common
cause of overheating so these should be removed regularly. Switch off the heater,
remove the plug from the socket and allow the heater to cool down before cleaning or
carrying out maintenance work.
Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not
use aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or
chemical solutions!
Using a vacuum cleaner, carefully remove any dust and dirt from the grills. Be
careful not to touch or damage any internal parts during cleaning!
The heater contains no other parts which need maintenance.
At the end of the season, store the cleaned heater in the original packaging if
necessary. Store it upright in a cool, dry and dust-free place.
Do not dispose of heater with household waste when it becomes worn or
damaged beyond repair. Take it to your local authority's collection point for
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom Safe-t-shine 900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Safe-t-shine 900 in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info