591463
17
Zoom out
Zoom in
Previous page
1/24
Next page
17
Timer. Push the button the number of hours after which the heater must switch itself
off (from 0 to 8 hours).
Thermostat buttons. After
pushing, “AUTO” is shown in the
display. You can now set the
desired temperature, from 15 to
35°C. With ‘+’ you increase the
desired temperature, and with -
you decrease the desired
temperature. The display shows
the set temperature for 3 seconds
and then switches back to the
ambient temperature. When the temperature drops to more than 2° below the desired
temperature the heater will operate at 1200W. When it drops to more below the
desired temperature, the heater will operate at 2000W. If the ambient temperature is
higher or equal to the set temperature, the heater will switch off.
Pushing the ON/OFF and ventilator button again simultaneously will switch off all
functions. The ventilator will then cool down for 30 seconds. Then switch the main
switch to 0 and pull the plug out of the socket.
The display shows all set functions.
Attention! The heater remains hot for some time after use!
Remote control:
Place 2 x AAA batteries in the compartment in the correct
manner and close it.
The buttons on the remote control work in the same
manner as those on the control panel.
Ensure that there are no obstacles between the remote
control and the receiver on the heater!
Safety features
The heater is fitted with a tipping safeguard which automatically shuts off the appliance if it
inadvertently falls over. When the heater is returned to its upright position, it will resume
functioning as normal but, before reusing, switch off, unplug and check for damage. Do not
use the heater if it is damaged or malfunctioning, but have it inspected/repaired!
In case of internal overheating, the overheating safeguard will switch the heater off. This
may occur if the heater cannot give off enough heat or if it cannot draw in enough fresh air.
As mentioned above, this is generally caused by (partially) covering the heater, obstructing
the air intake and/or outlet grills or installing the heater too close to a wall or something
similar. When the overheating safeguard switches the heater off, you must then switch off
by means of the operation panel and main switch. Unplug and allow the heater to cool
down. Remove and/or amend the cause of overheating and use again, as normal. If you
cannot find a cause and overheating recurs, stop using the heater, and take it in for
inspection/repair.
Cleaning and Maintenance
Keep the heater clean. Deposits of dust and dirt in the appliance are a common cause of
overheating so these should be removed regularly. Switch off the heater, remove the plug
from the socket and allow the heater to cool down before cleaning or carrying out
maintenance work.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom Safe-t-Heater StH2000T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Safe-t-Heater StH2000T in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info