510016
10
Zoom out
Zoom in
Previous page
1/28
Next page
10
21. Keep the heater clean. Dust, dirt and/or a build up of deposits in the heater are a common cause of overheating.
Make sure these deposits are removed regularly.
22. Do not turn on the appliance if you have discovered damage to the appliance, cord or plug, if the appliance is
malfunctioning, if it has been dropped or if there are signs of any other defect. Return the complete product to the
vendor or to a certified electrician for inspection and/or repair. Always ask for original parts.
23. The heater is filled with special oil. Repairs that involve opening the oil containers may only be carried out by the
manufacturer or one of its service points. Consult them if you suspect an oil leak.
24. Do not use attachments and/or accessories that have not been recommended or supplied by the manufacturer.
25. The appliance (incl. cord and plug) may only be opened and/or repaired by properly authorised and qualified
persons.
26. Only use this heater for its intended purpose, and as described in this instruction manual.
Not abiding by instructions 24, 25 and 26 may lead to damage, fire and/or personal injuries. A failure to adhere to these
rules also immediately nullifies the guarantee and vendor, importer and/or manufacturer do not take responsibility for any
of the consequences!
Description
A ON/OFF switch
B Thermostat dial
C Handle
D Oil filled fins
E Base
Installation, Location and Connection
Remove all packaging material and keep out of reach of children. After removing packaging, check the appliance
for damage or other signs that could indicate a fault/defect/malfunction. In case of doubt, do not use the appliance,
but contact your vendor for inspection or replacement.
Slide the foot supplied onto the back fin of the radiator (see photo); the foot on the front fin has already been
attached.
Warning: only use the heater if it is standing upright, with a secure base (as pictured on the front of this
booklet). Any other position is dangerous!
Choose a suitable location for the heater which is at least one metre away from any obstructions, walls or
inflammable materials (see also safety instructions).
Make sure a functioning heater is always placed on a solid, flat and horizontal surface. Never place it on a bed,
couch, deep pile carpet etcetera!
Check that the socket used is earthed and that it matches the power specified on the heater’s type plate.
Set-up and Operation
Set the power switches to OFF and the thermostat dial to maximum.
Plug in the heater.
Turn the heater on by switching the ON/OFF switch to ON. The light will go on and the heater begins to work.
When the room has reached the desired temperature, turn the thermostat button to the left (towards minimum) until
you hear a click. The light will go out. When the button is in this position, the heater will maintain the current
temperature by regularly switching on and off. The light will go on when the device switches on. Turning the
thermostat button to the right/left increases/decreases the set temperature.
To switch off, turn the power switches to OFF (off). The heater switches off. Unplug.
Note! It takes a long time for an oil filled radiator to cool down. Give the radiator sufficient time to cool down before
touching or moving (use handle!).
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom RK500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom RK500 in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info