13
The party-tent heater must be hung so that there is 40 cm of free space between
the decorative cover and any ceiling, tent canvas etc.
Additionally, at least 50 cm of space must be left at the sides, between the device
and any side walls, tent canvas and other objects. There must also be at least 1.80
m between the ground and the underside of the control box. The party-tent heater
can never be hung on a hook in the wall as it could hang at a slant!
There are two methods of hanging:
1. On the ceiling
2. On a frame (e.g. a tent frame)
1. Hanging on the ceiling
The party-tent heater must be hung on a concrete ceiling. Never hang it on a
ceiling made of wood, plaster or any other material! The attachment materials and
fire safety measures are not suitable for this type of installation.
Seek a location in the ceiling that fulfils all of the requirements;
Drill a sufficiently deep hole with a diameter of 8 mm;
Knock the key-bolt with hanging eye into
the hole; secure it by turning clockwise
and check that the hanging eye is
screwed into the key-bolt properly or that
the bolt and eye is firmly attached.
Ensure that the attachment kit can bear
the weight of at least 10 kg.
Hang the party-tent heater on the
hanging eye with the karabiner hook so
that the party-tent heater is 40 cm from
the ceiling.
Check that the karabiner hook is correctly closed.
2. Hanging on a frame (e.g. a tent frame)
Make sure that the party-tent heater can hang freely from the attachment point
you have selected and that it is sufficiently sturdy to bear the weight of the heater.
Secure it properly so that it cannot sag, slide or move in any other way.
Seek a location in the frame that fulfils all of the requirements;
Use the extra attachment chain with a karabiner hook at each end to secure
effectively:
- Hook the security chain to the ring on the hanging chain that is attached to the
party-tent heater, using the karabiner hook;
- Wind the security chain around the frame once or twice;
- Then attach the second karabiner hook also to the ring at the hanging chain;
this will ensure that the party-tent heater remains 40 cm from the frame.
Check that the karabiner hook is closed properly and that the party-tent heater is
securely attached. It should not slide, sag or move at all!
Take care! The party-tent heater’s upper decorative cover must be
positioned at least 40 cm from the tent canvas, cover or any other item!
