1. Set the ON/OFF switch to the ON position
(Figure 9, pos. 4).
2. The O light indicator lights up (Figure 11, pos.
2).
3. Press the ON/OFF button on the control
panel (Figure 11, pos. 3) or the remote
control (Figure 11, pos. 1).
4. The I light indicator lights up.
Set the LED light
1. Press the Light button on the remote control (Figure 5, pos. 3) repeatedly to choose the
desired light color:
• red;
• green;
• blue
• white;
• off.
Set the timer
1. Use the Timer button on the control panel (Figure 4, pos . 6) or the remote control
(Figure 5, pos. 2) to start the count-down timer of:
• 1 hour, press 1 time. The 1H indicator lights up;
• 2 hours, press 2 times. The 2H indicator lights up;
• 3 hours, press 3 times. The 1H indicator and the 2H indicator light up;
• 4 hours, press 4 times. The 4H indicator lights up;
• 5 hours, press 5 times. The 1H indicator and the 4H indicator light up;
• 6 hours, press 6 times. The 2H indicator and the 4H indicator light up;
• 7 hours, press 7 times. The 1H indicator, the 2H indicator and the 4H indicator light up.
Standby mode
1. Press the ON/OFF button on the control panel (Figure 4, pos . 6) or on the remote
control (Figure 5, pos. 1).
2. The O light indicator lights up.
After operation
