510067
12
Zoom out
Zoom in
Previous page
1/28
Next page
12
ASSEMBLY
1. Remove all the packaging materials and check whether the parts
of your table heater are not damaged. Also check whether all
accessories have been supplied. If something is missing or
damaged, contact your supplier.
2. Put the heater body upside down on a flat surface (see fig.).
Slide the top from the foot (2) over the assembly brackets to the
extent that both brackets (7) fall through the correct holes in the
lid (2). Then, place the mounting plate (3) over the brackets in
the same way, in the lid. Attach the lid and plate to the heater
body using the 4 M4*20 (1) screws.
3. Place the foot weight (6) in the lid (2). Please note: only two of
the four holes in the foot weight fit around the assembly brackets!
4. Place both rings (5) and the M6*20 screws (4) in the holes of the
foot weight, where the assembly brackets are, and screw them in
with the Allen key provided.
5. Now put the tabletop upside down on the ground and put the
heater body (still with the foot on top) on top of the tabletop, in
the table mount (9). The screw holes in the table mount and
tabletop have to fall on top of each other. Now attach the
tabletop onto the heater body using the four M6*8 screws (10).
Finally, turn your Outdoor table heater upright.
WORKING
Check for every use:
- or the appliance doesn’t show signs of damage.
- or there are no objects, canvas, sun screens etc. are inside the
safety distances.
- or the socket you want to use gives the correct tension
(230V-50Hz). Check whether the socket is earthed and secured with
a 30mA circuit breaker.
If everything is all right you can insert the plug into the socket.
You can turn then turn the machine on using the operating button I
(one element of 800W, half power) or II (2 elements, together
1600W, full power). The button can turn on both directions. To turn
the machine off, you turn the button to 0 and remove the plug from
the socket. Allow the radiator time to cool.
In time, the glass of the heating element may colour white. This is
normal and does not affect its functioning or the lifespan of the
product.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom Outdoor Table-heater at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Outdoor Table-heater in the language / languages: German, Dutch, French as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info