591544
18
Zoom out
Zoom in
Previous page
1/28
Next page
18
Slide a new brush over the spindle with the
protrusions on the spindle in the recesses on
the brush hole (first remove the old brush if it is
to be replaced).
Do up the tensioning screw again while holding
the spindle still.
The hard brush supplied is suitable for regular
and stubborn weeds.
A worn brush must be replaced immediately.
USER INSTRUCTIONS
Before use:
Check that the wheel, brush and the closure on the shaft are secure.
Check that the socket you are using provides
the correct voltage (see specification plate on
weed brush).
Connect the weed brush to a suitable extension
cable and hook the cable behind the clamp (see
diagram).
Hold the device with both hands (one hand on
each handle) and check that the underside of
the device is flat and horizontal.
Operating:
If all checks are ok, you can put the plug into the
socket.
Now press the unlocking device (A), press the
ON/OFF switch (B) and keep it depressed.
Release the ON/OFF switch in order to switch
the device off. The device will lock automatically.
Use:
Move the device over the surface area to be treated at a constant speed. For the best
results, you are advised to test the device on a small area first. Check to ensure the tiles
are not damaged.
Only use the device for dry weeds.
Keep the device out of the vicinity of hard objects and plants.
Brush the long edges first and then the short ones.
Do not use the brush in the same spot for too long. The brush will then push into the
joints and will remove the sand/soil.
Regular brushing helps prevent stubborn weeds taking hold.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom Onkruidborstel 140W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Onkruidborstel 140W in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info