510049
41
Zoom out
Zoom in
Previous page
1/72
Next page
41
If you can, use 1-K paraffin in this heater. Other premium quality paraffin may also
be used.
Electrical connection
Before use, check the device and the electrical cable, plug and socket for any
damage or wear and tear and do not use if you discover any problems.
This heater is fitted with a standard 230V - 13A plug. Choose an impact-resistant
type if it ever needs replacing. The electricity network to which the heater is
connected must be equipped with an earth leakage circuit breaker (30 mA) and the
socket must be earthed.
Repairs to the electrical system must always be carried out by a qualified electrician!
Before use, always check that the socket is of the correct voltage, is earthed, has
an adequate fuse (5A) and forms part of a mains network with an earth leakage
circuit breaker.
If you have to use an extension cable, make sure that the cable is of a suitable
width which is appropriate for the voltage and amperage.
Instructions for use
Starting the heater:
Place the heater on a stable, flat and horizontal surface.
Remove the tank cap.
Fill the tank with paraffin or diesel.
Replace the cap on the tank.
Note: Never replenish fuel if the heater is on or is still hot. Always wait until the
heater has cooled down before topping up the fuel.
Never fill up the fuel in an enclosed area; always do it outdoors.
Do not overfill the heater and remove any spilt fuel immediately, before using the
heater.
Now insert the plug into the socket.
Set the thermostat to the desired setting.
Press the ON/OFF switch to ON. The light will come on and the heater will start.
Important: Ignite the heater for the first time outdoors and then let it run for at least
10 minutes. Oil and similar substances used during the manufacturing process will be
burnt off and may produce toxic gases.
If the heater won’t start, the thermostat regulator may be set too low. Turn the
thermostat button up and try again. If it still doesn’t start, set the switch to OFF and
then switch back to ON.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom OK37T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom OK37T in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info