510049
36
Zoom out
Zoom in
Previous page
1/72
Next page
36
Prevent unexpected starting: check that the switch is OFF before you insert the
plug into the socket.
Use the heater for its intended purpose only. Do not make any changes or
connect anything to it. If you are not sure of whether the heater can be used, contact
your supplier or the importer.
Only have your heater repaired by a qualified person: the heater fulfils safety
requirements. That is why repairs must only be carried out by a suitable, qualified
individual, using original parts. Deviations from this regulation will invalidate the
guarantee and the supplier and manufacturer will no longer be liable for any
consequences.
And also:
Every time you use it, check that the heater is in good condition and is working
properly. Have damaged parts repaired or replaced immediately.
Only connect the heater to a socket which corresponds to the voltage and
frequency that is stated on the heater’s specification plate. Only use an earthed,
3-pin socket. If you have to use an extension cable, make sure it is of the
appropriate thickness!
Only use paraffin or diesel in your heater, in accordance with the instructions in
this booklet.
Keep the front of the heater at least 2.5 metres from any flammable materials
such as wood, plastic, paper, tent cloth, etc and the back and upper sides at least
125 cm from this type of material.
Always position the heater on a flat, stable and horizontal surface.
Do not use the heater in the vicinity of flammable materials, liquids, gases or
pressurised gas pipes.
Do not use the heater in an enclosed space, living area, ground floor, cellar or
space under ground level.
If using in locations with (too) little ventilation, too much moisture etc, special
measures must be taken in relation to the supply and removal of air, soot,
extinguishing etc. Consult a qualified expert in this instance.
Do not allow untrained, inexperienced people to operate the heater and do not
allow it to be operated unless all covers, lids and so on have been correctly
installed.
Never move the heater and do not touch if it is in operation or is still hot. Unplug
and then leave to cool.
Never transport the heater with fuel in the tank!
Do not damage the electrical cable. Do not tilt the heater using the cable and do
not pull on the cable to remove the plug from the socket. Keep the cable away
from heat, oil and sharp edges. Do not use the heater if the cable is damaged but
make sure it is replaced by your supplier or a recognised electrician in order to
prevent risks.
Never leave a working heater unsupervised; unplug the device when leaving the
workspace. Do not switch the heater off by removing the plug from the socket;
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom OK37T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom OK37T in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info