Manual Eurom OK22T (page 36 of 72) (English, German, Dutch, French)

510048

Zoom out

Zoom in

1/72

Prevent unexpected starting: check that the switch is OFF before you insert the

plug into the socket.

Use the heater for its intended purpose only. Do not make any changes or

connect anything to it. If you are not sure of whether the heater can be used, contact

your supplier or the importer.

Only have your heater repaired by a qualified person: the heater fulfils safety

requirements. That is why repairs must only be carried out by a suitable, qualified

individual, using original parts. Deviations from this regulation will invalidate the

guarantee and the supplier and manufacturer will no longer be liable for any

consequences.

And also:

 Every time you use it, check that the heater is in good condition and is working

properly. Have damaged parts repaired or replaced immediately.

 Only connect the heater to a socket which corresponds to the voltage and

frequency that is stated on the heater’s specification plate. Only use an earthed,

3-pin socket. If you have to use an extension cable, make sure it is of the

appropriate thickness!

 Only use paraffin or diesel in your heater, in accordance with the instructions in

this booklet.

 Keep the front of the heater at least 2.5 metres from any flammable materials

such as wood, plastic, paper, tent cloth, etc and the back and upper sides at least

125 cm from this type of material.

 Always position the heater on a flat, stable and horizontal surface.

 Do not use the heater in the vicinity of flammable materials, liquids, gases or

pressurised gas pipes.

 Do not use the heater in an enclosed space, living area, ground floor, cellar or

space under ground level.

 If using in locations with (too) little ventilation, too much moisture etc, special

measures must be taken in relation to the supply and removal of air, soot,

extinguishing etc. Consult a qualified expert in this instance.

 Do not allow untrained, inexperienced people to operate the heater and do not

allow it to be operated unless all covers, lids and so on have been correctly

installed.

 Never move the heater and do not touch if it is in operation or is still hot. Unplug

and then leave to cool.

 Never transport the heater with fuel in the tank!

 Do not damage the electrical cable. Do not tilt the heater using the cable and do

not pull on the cable to remove the plug from the socket. Keep the cable away

from heat, oil and sharp edges. Do not use the heater if the cable is damaged but

make sure it is replaced by your supplier or a recognised electrician in order to

prevent risks.

 Never leave a working heater unsupervised; unplug the device when leaving the

workspace. Do not switch the heater off by removing the plug from the socket;

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eurom OK22T in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eurom OK22T Manual

Product: