591472

Eurom Moonheater Manual

12
Zoom out
Zoom in
Previous page
1/32
Next page
12
24. The appliance (incl. cord and plug) may only be opened and/or repaired by properly
authorised and qualified persons.
25. Only use this heater for its intended purpose and as described in this instruction manual.
Not abiding by instructions 23, 24 and 25 may lead to damage, fire and/or personal injuries.
A failure to adhere to these rules also immediately nullifies the guarantee and vendor,
importer and/or manufacturer do not take responsibility for any of the consequences!
Description
1 – control dial
2 – thermostat dial
3 – air outlet grill
Location and Connection
Remove all packaging material and keep
out of reach of children. After removing
packaging, check the appliance for
damage or other signs that could indicate
a fault/defect/malfunction. In case of
doubt, do not use the appliance, but contact your vendor for inspection or replacement.
Choose a suitable location for the heater which is at least one metre away from any
obstructions, walls or inflammable materials (see also safety instructions).
Make sure a functioning heater is always placed on a solid, flat and horizontal surface.
Check if the control dial is set to 'OFF' (O).
Fully extend the power cord and plug into a suitable 220-240V socket. To prevent the
circuit overloading, check that no other appliances are connected to the same group.
Set-up and Operation
Turn the thermostat dial to maximum (clockwise as far as possible).
Switch the heater on by turning the control dial to one of the following two positions:
I Heating at half power (1000W)
II Heating at full power (2000W)
It is most economical to heat the space at full power, then to switch to half power to
maintain the temperature.
Both at half and full power, the fan rotates at the same speed; the difference between
the two lies in the number of heating elements in use.
Once the desired temperature is reached, turn the thermostat dial back slowly until you
hear a click. The temperature is now set. The heater will automatically switch on and off
to maintain the set temperature. To set a higher or lower temperature, turn the
thermostat dial either clockwise or anticlockwise.
To switch the heater off, set the power dial to ‘0’ (off). Unplug.
Safety features
In case of internal overheating, the overheating safeguard will switch the heater off. This
may occur if the heater cannot give off enough heat or if it cannot draw in enough fresh air.
As mentioned above, this is generally caused by (partially) covering the heater, obstructing
the air intake and/or outlet grills or installing the heater too close to a wall or something
similar. When the overheating safeguard switches the heater off, set the mode selector dial
to ‘0’ (off), unplug and allow the heater to cool down. Remove and/or amend the cause of
overheating and reuse the heater as normal. If you cannot find a cause and overheating
recurs, stop using the heater, and take it in for inspection/repair.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom Moonheater at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Moonheater in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info