812233

Eurom Mon Soleil Wi-Fi 720 Manual

44
Zoom out
Zoom in
Previous page
1/200
Next page
44
level. The device will keep heating until the set temperature of the Wi-Fi thermostat is
reached.
It is possible to connect multiple devices to a single Wi-Fi thermostat. All the connected
devices will switch on- and off simultaneously.
To use the Wi-Fi thermostat:
1. Connect the Wi-Fi thermostat to a power outlet.
2. Download the Eurom Smart App on a (mobile) device.
3. Open the Eurom Smart App.
4. Add the Wi-Fi thermostat and other devices to the Eurom Smart App.
5. Go to the device(s) and press the Pairing button to pair the device(s) to the
Wi-Fi thermostat.
The device is connected to the Wi-Fi thermostat. The G-sign illuminates in the Eurom Smart
App and on the device. Now you can enjoy the optimized comfort level of permanent electric
heating.
Temperature calibration (Optional)
CAUTION
When the device is mounted on the ceiling, the internal temperature sensor
(Figure 3, pos. 4) is not able to measure the temperature in the room correctly
due to the fact that heat rises. Therefore, it is absolutely necessary to calibrate
the device panel when it is mounted on the ceiling.
Calibrating the device
1. Set the desired temperature to 45 °C (max. temperature).
2. Let the device heat without interruptions for 120 minutes.
3. Place a digital room thermometer (not included) at a central place where the desired
temperature should be achieved; recommended is 150 cm from the floor.
4. After 120 minutes, calculate the difference between the external thermometer and the
temperature shown on the display of the heater (press any button to make it reappear).
For example: if the display shows 36 °C and the thermometer 20 °C, then the calibration
number is 16.
5. Press the Calibration button on the remote control; a number appears on the display.
6. Press the Plus or Minus button to select the calibration number, from 00 to 25. In our
example this is 16.
7. Press the OK button; the calibration number is now set. The temperature measurement
on the heater is now corrected with the set calibration value.
8. Set the ON/OFF switch to the OFF position (Figure 11, pos. 2) to activate the calibration
process. When the calibration value is changed, the device has to be turned off and then
on to active the new calibration value.
Calibration mode
• Every time the device is turned on and starts heating, the calibration process will start.
The device display will show CL and the Eurom Smart App will show Calibration in
progress. The calibration process uses the calibration number to gradually adjust the
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom Mon Soleil Wi-Fi 720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Mon Soleil Wi-Fi 720 in the language / languages: English, German, Dutch, Danish, French, Swedish as an attachment in your email.

The manual is 2.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info