Display (3)
a. Temperature / Data
b. Heating symbol
c. Open-window detection symbol
d. WiFi symbol
e. Capacity indication symbol
Remote control
1. ON/OFF button
2. C (Cancel) button
3. Open-window detection button
4. SET button
5. OK button
6. EDIT button
7. ECO button
8. TEMP (temperature) button
9. Time on / Time off button
10. Higher (+)button
11. Lower (–)button
12. WEEK button
Operation with control panel
Operation using the control panel on the heater
Make sure the heater is firmly attached to the wall. Turn the main switch ON.
The symbol indicating the capacity lights up and the WiFi symbol flashes on the display of
the heater. When the WiFi symbol flashes, you can make a connection.
1. Press the ON/OFF button on the control panel.
First the heater’s display shows the set temperature for 3 seconds and subsequently,
the ambient temperature. (The set temperature is the most recently set temperature
or 20 °C in case of first use.)
If the set temperature is higher than the ambient temperature, the heater will start to
heat and the heating symbol will appear.
2. Using the + and – buttons, the set temperature can be adjusted from 0 °C to 37 °C). If
the set temperature is higher than the ambient temperature, the heater will start to
heat and the heating symbol will appear.
When the set temperature is reached, the heater will automatically switch OFF and
will switch ON again when the room cools down.
