The fixing materials supplied are intended for a brick wall. If you are using a different type
of surface, you should supply appropriate fixing materials yourself.
This heater has been designed to hang securely from the wall.
Do not use it until it has been properly installed, as described in these instructions for
use and never, for example, in a standing position or when leaning against something!
Wall mounting
The heater must be at least 30 cm removed from all objects, walls, etc.; the distance to
the floor must be at least 20 cm and there must be at least 30 cm above the heater.
Pay attention: The wall-suspension system on the rear side of the heating panel is pre-
mounted in order to hang the heating panel vertically. Viewed from the front, the main
switch is at the bottom side and the control panel is at the right-hand side. If you want to
hang the heating panel horizontally, you first have to mount the suspension frame, the
suspension knobs and the wall spacer on the rear side of the heating panel in a different
manner. Using a Phillips screwdriver, you can detach the suspension knobs and the wall
spacer and then mount them in another position (see illustration). In case of horizontal
mounting, it is sensible to use an external temperature sensor. This is because – when
mounting the panel horizontally – the fixed temperature sensor is positioned at the top
right-hand side of the panel and therefore, it measures a higher temperature. For
measuring the room temperature correctly, it is better to use an external temperature
sensor and to move the sensor downwards to below the heating panel.