591482
11
Zoom out
Zoom in
Previous page
1/40
Next page
11
OPERATING
Check that the details on the data plate
correspond to those of the electrical supply
which you wish to use for the fireplace. Do not
use the same connection for any other
equipment.
The control switches are located at the back
side of the heater.
By pressing the switches you will make the
following happen:
Switch 1: switch on the power supply to the heater and the flame
effect (without heating) (O depressed is OFF - I depressed
is ON).
Switches 1+2: switch on 600 Watt heating, with flame effect
Switches 1+2+3: switch on 1200 Watt heating, with flame effect
Check whether switch 1 is set to OFF (O depressed)
Connect the plug to an earthed power outlet.
Press switch 1 and, depending on what you want, switches 2 and 3 to start using
the heater.
Switch off the heater by resetting all switches to the OFF position. Remove the
plug from the power outlet; do this whenever the heater is not in use!
Note: If you use the fire in a room with very little background noise, you may some
noise caused by the flame effect. This is normal and no reason for concern.
Warning: This heater is not equipped with a device to control the room
temperature. Do not use this heater in small rooms when they are occupied by
persons not capable of leaving the room on their own, unless constant supervision is
provided.
REPLACING A BULB
Warnings:
Always unplug the fireplace before replacing a bulb!
The bulb get hot during use; allow plenty of time for it to cool down before
touching it!
The lamp (3) is located behind the small
Panel (2) on the bottom of the fire. To get to
the lamp you must unscrew 4 screws (1) that
keep the panel in place. Remove the panel
(see figure).
Pull the broken lamp out of the fitting and
replace it by the same 25W G9 halogen
lamp. Attention! Never touch a halogen
lamp with bare hands! That will shorten the
life. Use an original lamp, available at your supplier.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom Mini Fireplace heater at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Mini Fireplace heater in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info