23
recognized electrician to be checked and/or repaired. Always ask for
original parts to be used.
4. The device may only be opened and/or repaired by a competent
and qualified person. Do not carry our your own repairs as this
could be dangerous! Repairs carried out by unauthorised persons or
changes made to the device could damage the dust/waterproof
capacity of the device and will nullify the guarantee and the
manufacturer’s liability.
Failing to adhere to points 3 and 4 could lead to damage, fire and/or
personal injury. They will invalidate the guarantee and the supplier,
importer and/or manufacturer shall not be liable for the consequences.
Description
1. Blower grid, front
2. PTC element
3. Extraction grid back
4. Plug
5. Operation panel
6. Main switch
7. Display
Location and connection
Remove all packaging material and keep out of reach of children. After
removing the packaging, check the appliance for damage or other signs of a
fault/defect/malfunction. In case of doubt, do not use the appliance and contact
your vendor for inspection or replacement.
Select a suitable location for the device taking into account all the
aforementioned warnings in this manual.
Set-up and operation
Make sure the heater is switched off (on / off switch on off) and then insert the
plug into a correctly working 220-240V~50Hz socket. Note: place the heater
with the control panel facing up.
• Press the on / off switch on the side in the display shows --.
• Thermostat is set to 30°C as standard.
• Press the button, the heater starts heating.
• Press the + button to increase the temperature setting (max. 30°C).