591729
11
Zoom out
Zoom in
Previous page
1/32
Next page
11
Adjust the desired angle of radiation. The heater can turn on the bracket but never direct it
upwards (keep it facing forwards) and do not exceed a downward angle of 20° from the wall.
Then secure the bolts. Pay attention that the radiator doesn’t focus its heat from a short
distance at combustable materials!
Fasten all screws another time firmly and scheck or the heater is firmly mounted. Now your
infra red heater is ready for use.
For personal protection the installation, to which the EUROM GOLDSUN is connected, has to
be equipped with an earth fall device (max. 30 mAmp). Under some circumstances it may be
attractive to make a fast connection between the heater and the main supply, and to operate the
heater with a switch. Because the EUROM GOLDSUN has a high water tightness (IP65) and for
safety reasons, such a connection has to be made by a qualified electrician.
WORKING
Check for every use:
- or the appliance doesn’t show signs of damage.
- or the appliance still is fastened firmly. Mechanical bearing pressure, oscillating duet o wind
or rain could lead to loose.
- or there are no objects, canvas, sun screens etc. are inside the safety distances.
- or the socket you want to use gives the correct tension (230V-50Hz and is earthed.
If everything is all right you can insert the plug into the socket. The infra red heater will start to
work. When you use the appliance for
the first time (or after a long time again), observe it during the first 10 till 15 minutes to be sure
that is works trouble-free.
To stop the heater, take the plug out of the socket and give the heater time to cool down.
CLEANING - MAINTENANCE - SERVICE
Before cleaning or performing maintenance remove the plug from the power outlet and
wait until the appliance is sufficiently cooled off.
Lamp
Never touch the lamp with bare hands. If this occurs, try to remove the fingerprints (through the
grille) with a soft, dry cloth (you may also use a volatile solution such as alcohol). Fingerprints
can shorten the life-expectancy of the lamp! The heater may never be opened by an
unauthorised person.
Cleaning
This appliance consist of a robust and maintenance-free aluminium casing with a safety grill.
Wipe the appliance only with a clean and lint-free cloth or a soft brush. Never use abrasive
cleaners, scrubbing brushes and chemical cleaners for cleaning! Never use flammable cleaners
such as benzene or spiritus. Give the appliance time to dry before you use it again.
To protect against electrical shock and danger of life, do not immerse cord, plug or any part of
the appliance in water or other liquid.
The German reflector is made of highly polished aluminium and should not lose its reflective
property as a result of dirt or dust. You do not have to clean it very often. If this is necessary
from time to time, use a small, soft brush through the grille. Do not touch the lamp!
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom GOLDSUN SUPRA 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom GOLDSUN SUPRA 2000 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info