Manual Eurom GOLDEN 2000 AMBER SMART met app (page 18 of 76) (English, German, Dutch, Danish, French)

591723

Zoom out

Zoom in

1/76

The following applies for all options:

 However you install the GOLDEN AMBER SMART, always lead the electrical cable

directly away from the heater. It may not become hot!

 Adjust the desire radiation angle of the device. Do this by undoing both Allen screws

slightly using the Allen key. Make sure you secure them again once you have made the

adjustments! The heater can rotate through approximately 90° - with wall fastening

from 30° upwards to approximately 60° downwards. When adjusting the angle ensure

that the radiator does not radiate heat onto flammable materials from a short

distance!

 Fasten all screws another time firmly and scheck or the heater is firmly mounted. Now

your infra red heater is ready for use.

 For personal protection the installation, to which the EUROM GOLDEN 2000 AMBER

SMART is connected, has to be equipped with an earth fall device (max. 30 mAmp).

Under some circumstances it may be attractive to make a fast connection between the

heater and the main supply, and to operate the heater with a switch. Because the

EUROM GOLDEN 2000 AMBER SMART has a high water tightness (IP65) and for safety

reasons, such a connection has to be made by a qualified electrician.

WORKING

Check for every use:

- 

- or the appliance still is fastened firmly. Mechanical bearing pressure, oscillating duet o

wind or rain could lead to loose.

- or there are no objects, canvas, sun screens etc. are inside the safety distances.

- or the socket you want to use gives the correct tension (220-240V-50Hz) and is

grounded.

If everything is all right you can insert the plug into the socket.

The Golden 2000 Amber Smart has a remote control that works with two batteries: AAA,

1.5V.

While using, point the remote control to the receiving point of the heater. If there are

obstacles between remote control and the heater, it will not work!



"I" (on); The red light on the reception point will go on.

he ON

button The device will

start working on the maximum output (2000W).

 Choose another setting by pressing one of the

three buttons:

- Low = 660 Watt

- Med = 1320 Watt

- High = 2000 Watt

           e

remote control. Then turn it off by pressing the on/off-

switch (5) 

outlet. Allow the heater to cool down.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eurom GOLDEN 2000 AMBER SMART met app in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 2,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eurom GOLDEN 2000 AMBER SMART met app Manual

Product: