Manual Eurom Force 1240 (page 11 of 24) (English, German, Dutch, French)

540697

Zoom out

Zoom in

1/24

OPERATION

 Put the machine-connection of the hose in

the machine till the narrow part is in total in

the machine and clicks. Pressing the ribbed

clamps on the connector will enable you to

disconnect the hose.

 After this, connect the accessories you wish

with a twisting force, see picture.

 For the vacuuming of liquid the motor (which

is situated in the cap) is provided with a

floater that is hanging under the motor, in the

barrel. For the vacuuming of dry dirt and dust

the motor is provided with a filter with a

basket that the floater surrounds and in that

way prevents that dust enters the mechanic

system (see picture). Do you want to vacuum

liquid, remove than the filter wit basket by

opening the locking blocks, to lift and turn the

cap and remove the filter with basket. Bring

the cap back in its position and close the

blocks.

 Be carefull!

 Never vacuum dust without the filter with

basket around the floater!

 Never vacuum liquid with the filter with

basket around the floater!

 Insert the plug into the socket.

 Press the switch on/off to I to turn on. Type 1240 has 1 switch which is used to engage

the power. Type 2070 has 2 switches, type 3080 has 3 switches; each switch

corresponds to 1000w of power.

 After use, switch the device off by pressing the switch(es) on/off to O and remove the

plug from the socket. Wind the electrical cable around the cable hanger. Type 1240:

Place the accessories at the appropriate locations behind the device.

SAFEGUARDS

If you are sucking up water and the container is full, a float will cut off suction. The motor

will produce a noise that sounds like high revs but, in fact, the machine will no longer

suck effectively. In this event, switch the unit off and remove the plug from the socket.

Empty the container; you can then carry on using the device as normal.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Force 1240 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eurom Force 1240 Manual

Product: