591525

Eurom Force 1012 wet dry Manual

11
Zoom out
Zoom in
Previous page
1/24
Next page
OPERATION
Dry vacuum cleaning:
Check to ensure that the dust bag is installed
correctly in the body of the device. Close the
body of the device properly with the clamps.
Insert the hose as far as it will go into the hose
connector: you may turn it until the catch falls
into the recess. Then turn it a quarter clockwise.
After this, connect the accessories you wish with
a twisting force.
Insert the plug into the socket.
Press the ON-switch (I) to turn on (and press
later on the off-switch (O) to turn off).
You can adjust the airflow by pushing the sliding block 1B up and down.
Wet vacuum cleaning:
For the vacuuming of liquid the motor (which is situated in the cap) is provided with a
floater that is hanging under the motor, in the barrel. For the vacuuming of liquid the
motor is provided with a filter that the floater surrounds and in that way prevents that
objects enter the mechanic system. Never vacuum liquid without the filter around the
floater!
Be carefull!
Never vacuum dust without the dust bag!
Never vacuum liquid with the dust bag!
Never vacuum liquid without the filter around the floater!
Blowing
By connecting the suction hose to the blower opening (instead of the hose connector)
you can blow instead of vacuuming. Operation is otherwise the same.
CLEANING UP
Switch the device off and remove the plug from the socket. Place the accessories at the
appropriate locations on the device, see image.
CLEANING AND MAINTENANCE
Before cleaning or maintenance: always switch off the equipment and unplug it.
Emptying dust bag
Open both the locking blocks (4) en take the up housing from the vacuum cleaner.
Remove the dust bag from the body of the device and open by sliding the plastic clamp
off. Empty the dust bag, shake it until it is clean and connect once again. Replace in the
device correctly. At the end, place back the up housing and close the locking blocks.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom Force 1012 wet dry at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Force 1012 wet dry in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info