Replacing the light
The light socket is under the covering cap (1). This cap is fastened to the base with 2 screws (2). To
replace the light hold the lid of the Glue trap, use a screwdriver to unscrew both plugs and remove
the cap. You can now easily pull the light out of the socket in order to replace it. Finally, refit the cap
and fasten it with the screws. Only use the same type of light!
Maintenance & Cleaning
Always take the plug out of the wall socket and allow the light to cool down before executing
cleaning or maintenance.
Keep the exterior of the device clean with a dry or well wring out moist cloth. Do not use abra-
sive or corrosive cleaning agents!
In case of malfunction, please unplug the unit and contact your dealer for inspection or repair.
Never open or repair the unit by yourself!
Removal
Do not dispose of device with household waste when it becomes worn or damaged
beyond repair. Take it to your local authority's collection point for electrical appliances
where any reusable materials will be collected and redistributed.
