Note: these pumps may not be used in a swimming pool!
This pump is not suitable for continuous use, such as the continual circulation of
water. This type of use will substantially shorten the pump’s life expectancy.
DESCRIPTION
BEFORE USE
When preparing the device for use, take the plug out of the electrical socket!
Hose connection
Connect the hose connector to the fitting.
The hose connector goes from 25 to 32
mm (or 1” to 1½”). If you are exclusively
using a more wide hose, you can remove
the remaining piece of the fitting with a
sharp knife or saw. Attach the hose to the
appropriate part of the connector with a
hose clamp (or turn it on it). The best
results of pumping efficiency are achieved
with a 32 mm hose.
Locating and moving
- Make sure the pump is positioned at a stable location, particularly if you want it to
work automatically.