702598
12
Zoom out
Zoom in
Previous page
1/32
Next page
12
DESCRIPTION
1. Handle
2. Hoseconnector
3. Pump house
4. Float switch
5. Suction opening
BEFORE USE
When preparing the device for use, take the plug out of the electrical socket!
Hose connection
The FlowPro 350 is supplied with two hose connections: 19mm and 25mm. You can
optionally screw these onto the pump. A 1" screw connection may also be used if
necessary. Attach the hose to the appropriate part of the connector with a hose
clamp (or turn it on it).
Locating and moving
- Make sure the pump is positioned at a stable location, particularly if you want it to
work automatically.
- Ensure that the suction openings are not blocked (not even partially). If the pump
is positioned on a soft surface (e.g. a sand bed), place it on a tile or something
similar.
- Do not use the electrical cable or the hose to lift the pump or hang it up. If you
wish to locate the pump in a water source or shaft, use a rope that is attached to
the handle to do so.
- If you are using the pump temporarily, you may use a flexible hose that is
connected to the pump using a hose clamp. You can attach fixed discharge pipes
if you have a permanent installation.
- Take note! If you use the pump in a pit or shaft, this must have minimum
dimensions of 40x40x50 cm, to enable the float to move freely.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom Flow Pro 350 mop at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Flow Pro 350 mop in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info