702592
16
Zoom out
Zoom in
Previous page
1/48
Next page
16
MAINTENANCE
Before you carry out checking or cleaning tasks on the pump you must switch it
off and remove the plug from the socket.
Your submersible pump is more or less maintenance-free. The only tasks you must
carry out are as follows:
Carry out a regular visual inspection. Make sure the pump is not damaged. Check
the electrical cable, the plug, the float switch and the float cable for damage too. If
you discover damage, you must take the device to your supplier or an accredited
professional. Never attempt to carry out repairs yourself and never open the pump!
Regularly check that the float switch is working effectively, particularly if you have set
the pump to work automatically (every 3 months).
Regularly remove residues from the float with clean water.
Regularly check (by putting your fingers into the suction openings or, after the
removal of the curved fitting, in the outlet opening) whether any dirt (fibres, residues)
has accumulated around the blade. Remove it if this is the case.
Failing that, you proceed as follows:
- Unscrew the four screws in the feet of the bottom plate
- Remove the bottom plate
- Clean the blade with clean water (Note: Do not put down the pump on the blade!)
- Attach the base plate with the four screws.
If you cannot do so, take the pump to your supplier or to an accredited professional
to open the device and remove the residue.
If you regularly use the pump at different locations, you must rinse with clean water
(inside and out) after each use.
Keep the base of the well (or the tile on which the pump is positioned) free from mud
and residue.
Ensure that the pump does not freeze. Before winter sets in, run the pump dry and
store it in a frost-free location.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom Flow 750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Flow 750 in the language / languages: English, German, Dutch, French, Swedish, Norwegian as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info