509999

Eurom EK3001 Manual

11
Zoom out
Zoom in
Previous page
1/28
Next page
11
Set-up and Operation
If the heater is being used for the first time (or if you want to reset the desired temperature), turn the thermostat
dial to the maximum position (clockwise as far as it goes).
With the mode selector dial, adjust the heater to suit your preferences: fan only, low power or high power.
Once the temperature in the area being heated has reached the right level, slowly turn the thermostat dial
anticlockwise until you hear a soft click; leave the dial in that position. The heater will automatically maintain the
temperature at this level. It does this by switching the heating elements off and on when the temperature rises or
falls too much.
Note! After the thermostat has switched the heating elements off, the fan will keep turning. This means that the air
is constantly moved, allowing the heater to accurately detect if the area is cooling down.
The thermostat dial is continuously adjustable. A higher temperature is set by turning it clockwise; a lower
temperature by turning it anticlockwise.
Safety features
In case of internal overheating, the overheating safeguard will switch the heater off. If this occurs, immediately
turn the mode selector dial to O, unplug and allow heater to cool down for at least 10 minutes. In theory, the
heater can now be used as normal. There is, however, generally a reason for an appliance overheating. This may
be because the heater cannot adequately release its heat or take in fresh air (because the heater is covered, the
grills are blocked, the heater is placed too near a wall etcetera). Before using the heater again, therefore, remove
or adjust whatever caused the appliance to overheat. If you cannot find the cause and overheating recurs, stop
using the heater and contact your vendor or a certified electrician for inspection/repair. Overheating poses a
serious fire risk!
Cleaning and Maintenance
Keep the heater clean. Deposits of dust and dirt in the appliance are a common cause of overheating so these
should be removed regularly. Switch off the heater, remove the plug from the socket and allow the heater to cool
down before cleaning or carrying out maintenance work..
Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not use aggressive soaps,
sprays, cleaners or abrasives, waxes, polishes or chemical solutions!
Use a vacuum cleaner or compressor to carefully remove any dust and dirt from the grills and ensure that
the air intake and outlet openings are clean. Be careful not to touch or damage any internal parts during
cleaning!
The heater contains no other parts which need maintenance.
At the end of the season, store the cleaned heater in the original packaging if possible. Store upright in a
cool, dry and dust-free place.
Do not dispose of the heater with household waste when it becomes worn or damaged beyond repair. Take
it to your local authority's collection point for electrical appliances where any reusable materials will be
collected and redistributed.
CE-statement
Euromac bv., Genemuiden-NL hereby declares that the EUROM workspace heaters, type EK3001, comply with
the LVD guideline 2006/95/EC and the EMC guideline 89/336/EEC and meet the following standards:
EN 60335-1:2002+A1+A11+A12+A2+A13 EN 55014-1:2000+A1+A2
EN 60335-2-30:2003+A1+A2 EN 55014-2:1997+A1
EN 62233 :2008 EN 61000-3-2:2000+A2
EN 61000-3-3 :1995+A1+A2
Genemuiden, 04-05-2011
W.J. Bakker, alg. dir.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom EK3001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom EK3001 in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info