509998
12
Zoom out
Zoom in
Previous page
1/28
Next page
12
is constantly moved, allowing the heater to accurately detect if the area is cooling down.
The thermostat dial is continuously adjustable. A higher temperature is set by turning it clockwise; a lower
temperature by turning it anticlockwise.
Safety features
In case of internal overheating, the overheating safeguard will switch the heater off. If this occurs, immediately
turn the mode selector dial to O, unplug and allow heater to cool down for at least 10 minutes. In theory, the
heater can now be used as normal. There is, however, generally a reason for an appliance overheating. This may
be because the heater cannot adequately release its heat or take in fresh air (because the heater is covered, the
grills are blocked, the heater is placed too near a wall etcetera). Before using the heater again, therefore, remove
or adjust whatever caused the appliance to overheat. If you cannot find the cause and overheating recurs, stop
using the heater and contact your vendor or a certified electrician for inspection/repair. Overheating poses a
serious fire risk!
Cleaning and Maintenance
Keep the heater clean. Deposits of dust and dirt in the appliance are a common cause of overheating so these
should be removed regularly. Switch off the heater, remove the plug from the socket and allow the heater to cool
down before cleaning or carrying out maintenance work..
Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not use aggressive soaps,
sprays, cleaners or abrasives, waxes, polishes or chemical solutions!
Use a vacuum cleaner or compressor to carefully remove any dust and dirt from the grills and ensure that
the air intake and outlet openings are clean. Be careful not to touch or damage any internal parts during
cleaning!
The heater contains no other parts which need maintenance.
At the end of the season, store the cleaned heater in the original packaging if possible. Store upright in a
cool, dry and dust-free place.
Do not dispose of the heater with household waste when it becomes worn or damaged beyond repair. Take
it to your local authority's collection point for electrical appliances where any reusable materials will be
collected and redistributed.
CE-statement
Euromac bv., Genemuiden-NL hereby declares that the EUROM workspace heaters, type EK2001 complies
with the LVD guideline 2006/95/EC and the EMC guideline 2004/108/EC and meets the following standards:
EN 60335-1:2002+A11, A1:04+A12, A2 :06 EN 55014-1:2006
EN 60335-2-30:2003+A1 :04+A2 :07 EN 55014-2:1997/+A1 :2001
EN 50366 :2003+A1 :06 EN 61000-3-2:2006
EN 61000-3-3 :1995/+A1 :2001/+A2 :2005
Genemuiden, 28-04-2011
W.J. Bakker, alg.dir.
-----------------------------------------------------------------------------
Français
Données techniques
Type EK2001
Tension Volts/Hz 230 / 50
Puissance max. Watts 2.000
Possibilités de réglage Watts 0-650-1300-2.000
Classe d’isolation IP44
Dimensions cm 21,0 x 19,7 x 30,3
Poids kg 4,2 kg
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom EK2001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom EK2001 in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info