510009
10
Zoom out
Zoom in
Previous page
1/28
Next page
10
16. Never leave the heater unattended when switched on. Always switch if off before removing the plug from the
socket. Always unplug the heater when not in use! Pull on the plug to remove from the socket, never pull on
the cord.
17. Always switch the heater off, unplug it and leave to cool down before:
- cleaning the heater
- carrying out maintenance to the heater
- touching or moving the heater. Use the handle for this!
18. This machine gets hot when it is in use. To prevent burns, do not let bare skin come into contact with hot
surfaces.
19. Do not use a timer or a similar product to automatically switch on the heater. Always perform safety checks
before using the heater!
20. Exercise due caution when the heater is used in a room where there are children, people with a disability or
elderly people. Never leave these people alone in a room whilst the heater is on!
21. The device is not suitable for use by persons (including children) with a physical, sensual or mental limitation
or a lack of experience and knowledge, irrespective of whether they are being supervised or have been
issued with instructions in relation to the use of the device by a person who is responsible for their safety.
Always ensure that children cannot play with the device.
22. Keep the heater clean. Dust, dirt and/or a build up of deposits in the heater are a common cause of
overheating. Make sure these deposits are removed regularly.
23. Do not turn on the appliance if you have discovered damage to the appliance, cord or plug, if the appliance is
malfunctioning, if it has been dropped or if there are signs of any other defect. Return the complete product to
the vendor or to a certified electrician for inspection and/or repair. Always ask for original parts.
24. Do not use attachments and/or accessories that have not been recommended or supplied by the
manufacturer.
25. The appliance (incl. cord and plug) may only be opened and/or repaired by properly authorised and qualified
persons.
26. Only use this heater for its intended purpose and as described in this instruction manual.
Not abiding by instructions 24, 25 and 26 may lead to damage, fire and/or personal injuries. A failure to adhere to
these rules also immediately nullifies the guarantee and vendor, importer and/or manufacturer do not take
responsibility for any of the consequences!
Description
EUROM EKprof heaters are ‘real space’ heaters, with a powerful fan which disseminates a great deal of air.
Cold air is sucked in at the back, heated, and then blown out as hot air. Because a relatively large quantity of air
is sucked in and blown out, the air expelled by the heater does not feel particularly hot. As a great deal of air is
heated and blown out, however, the entire space (not just the air around the heater!) is gradually warmed up.
Location and Connection
Remove all packaging material and keep out of reach of children. After removing packaging, check the
appliance for damage or other signs that could indicate a fault/defect/malfunction. In case of doubt, do not
use the appliance, but contact your vendor for inspection or replacement.
Choose a suitable location for the heater, i.e. at least 2 metre away from any obstructions, walls or
inflammable materials (see also safety instructions). Always ensure that the heater has sufficient space at the
back to suck in air and at the front, to blow out hot air (3 metre).
Make sure the heater is always in an upright position on a solid, flat, horizontal and non-flammable surface.
Set-up and Operation
Make sure the heater is turned off (switch to O position). Now plug into an earthed, correctly functioning
230V / 50Hz (EK3000prof) 400V / 50Hz (EK12000prof) socket. Only connect the heater to an earthed
socket!
Turn the mode selector dial to the desired position:
EK3000prof: 0 = off
1 = fan only
2 = 1,5 kW
3 = 3 kW
EK12000prof: 0 = off
1 = fan only
2 = 6 kW
3 = 9 kW
4 = 12 kW
The heater will now start working.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom EK12000prof at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom EK12000prof in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info