Manual Eurom EK industrial heating lamp (page 16 of 42) (English, German, Dutch, French, Swedish)

591497

Zoom out

Zoom in

1/42

Assembly, location and connection

 Remove all packaging material and keep out of reach of children. After removing

packaging, check the appliance for damage or other signs that could indicate a

fault/defect/malfunction. In case of doubt, do not use the appliance, but contact

your vendor for inspection or replacement.

 Attach the two feet to the heater using 2 x 2 screws, as shown on the drawing.

Make sure that the pins on the housing slot into the recesses in the feet!

 Choose a suitable location for the heater, i.e. at least 1,5 metre away from any

obstructions, walls or inflammable materials (see also safety instructions).

 Make sure the heater is always in an upright position on a solid, flat, horizontal

and non-flammable surface.

 Make sure the heater is switched off (switch to O position), then plug into a

correctly functioning 220-240V/50Hz socket. Only connect the heater to an

earthed socket!

 By now pressing one of the switches, you turn the heater on at half output

(400W); by pressing both switches, the full output (800W) is switched on. By

turning the switches back to O, you switch the heater off.

Never use the heater without feet!

Safety features

The heater is fitted with a tipping safeguard which automatically shuts off the

appliance if it inadvertently falls over. When the heater is returned to its upright

position, it will resume functioning as normal but, before reusing, switch off, unplug

and check for damage. Do not use the heater if it is damaged or malfunctioning, but

have it inspected/repaired!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eurom EK industrial heating lamp in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.

The manual is 0,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eurom EK industrial heating lamp Manual

Product: