Manual Eurom EK industrial heating lamp (page 13 of 42) (English, German, Dutch, French, Swedish)

591497

Zoom out

Zoom in

1/42

English

Technical data

Type INDUSTRIAL HEATING LAMP

Supply voltage Volt/Hz 220-240 / 50

Maximum capacity Watt 800

Settings Watt 0 – 400 - 800

Insulation class IP24

Dimensions cm 27 x 23 x 33

Weight kg 2

General safety instructions

1. Before using the machine, carefully read this entire instruction manual.

2. Before using your new heater, check it, including cord and plug, for any visible

damage. Do not use a damaged heater, but send it back to your dealer for

replacement.

3. This heater is exclusively intended to heat workspaces such as workshops,

garages and storage spaces. Use the appliance for this purpose only.

4. This heater in not suitable for use in wet or damp spaces such as bathrooms and

laundry rooms. Do not place the heater in the vicinity of taps, bathtub, shower,

pool, fountains or other sources of moisture. Make sure it cannot fall into water

and prevent water from getting into the heater itself. If, at any time, the heater

does fall into water, unplug it immediately! Do not use a heater that has a damp

interior but have it repaired. Never immerse the heater, cord or plug in water and

never touch it with wet hands.

5. The supply voltage and utility frequency, specified on the machine, need to match

those of the socket that is used. The electrical installation needs to be protected

by a residual current device (max. 30 mAmp). Only connect the heater to an

earthed socket!

6. Fully extend the cord before plugging in the heater. Make sure it does not come

into contact with any part of the heater and prevent it from heating up any other

way. Do not run the cord underneath carpeting; do not cover it with mats, carpet

strips or similar and make sure it is not placed in any passageways. Make sure

the cord cannot be stepped on and that no furniture is placed on top of it. Do not

lead the cord around sharp corners and do not roll it up too tightly after use!

7. If possible, do not use an extension cord, as this poses the risk of overheating

and fire. If the use of an extension cord is unavoidable, then make sure it is an

undamaged, approved extension cord with a minimum diameter of 1.5 mm²,

suitable for a minimum permissible power of 1000 Watt. To prevent overheating,

always fully extend the cord!

8. Do not use the heater outdoors and do not use it in spaces smaller than 6 m². Pas

op! Caution! The heater does not have a thermostat. Do not allow people who

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eurom EK industrial heating lamp in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.

The manual is 0,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eurom EK industrial heating lamp Manual

Product: