involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
22. Keep the heater clean. Dust, dirt and/or a build up of deposits in the heater are a
common cause of overheating. Make sure these deposits are removed regularly.
23. Do not turn on the appliance if you have discovered damage to the appliance,
cord or plug, if the appliance is malfunctioning, if it has been dropped or if there
are signs of any other defect. Return the complete product to the vendor or to a
certified electrician for inspection and/or repair. Always ask for original parts.
24. Do not use attachments and/or accessories that have not been recommended or
supplied by the manufacturer.
25. The appliance (incl. cord and plug) may only be opened and/or repaired by
properly authorised and qualified persons.
26. Only use this heater for its intended purpose, and as described in this instruction
manual.
Not abiding by instructions 24, 25 and 26 may lead to damage, fire and/or personal
injuries. A failure to adhere to these rules also immediately nullifies the guarantee
and vendor, importer and/or manufacturer do not take responsibility for any of the
consequences!
Description
1 – Output button
2 – Thermostat dial
3 – Handle
4 – Fins
5 – Swivel casters (4x)
6 – Power cord spool with plug
connection
7 – Powercord with plug
8 – Wheel support
9 - Light
Installation, Location and Connection
Remove all packaging material and keep out of reach of children. After removing
packaging, check the appliance for damage or other signs that could indicate a
fault/defect/malfunction. In case of doubt, do not use the appliance, but contact
your vendor for inspection or replacement.
Screw the 2 x 2 swivel castors (5) with the 4 capped nuts onto the ends of the
two wheel supports (8). The wheels should be at the hollow side!