Manual Eurom E-Convect Metal (page 17 of 44) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish)

591325

Zoom out

Zoom in

1/44

Mounted (secured to a wall):

Choose a solid, flat and completely

vertical wall made of non-flammable

and non-melting material on which to

mount the heater (i.e. no wood,

synthetic materials, etc!)

 Decide where you want to mount

the heater. Make sure that the

heater has sufficient space

around it at all times and that no

inflammable materials are located nearby (see

also safety instructions). Do not place the heater

behind a door! The heater’s underside needs to

be at least 5 cm and max. 10 cm above the

floor, the sides at least 20 cm from the side

walls and the top at least 200 cm from the

ceiling, ceiling beams, etcetera.

 Attach the two hanging brackets to the wall. To

do so, drill (with a suitable drill) 2 holes 520 mm

apart, at least 35 cm from the floor, on a

completely horizontal line. Insert plugs. Screw

two long screws into the plugs until they

protrude by 8 mm.

 Secure the two fixing brackets underneath the heater. Then

position the small hole in the long side of the bracket over the

rear hole in the base of the heater, with the brackets’ short

sides pointing towards the floor and jutting out from the heater

in a straight line. Attach securely using the small screws.

 Slide the heater, with the gaps in the rear, over the suspension

brackets and lower the heater into the grooves. The fixing

brackets will ensure there is enough space between heater

and wall.

 Mark the place where the fixing brackets need to be fixed to

the wall. Take the heater down, drill holes and attach plugs at

the marked spots. Mount the heater and screw in the fixing

brackets with the two remaining long screws.

Set-up and Operation

 Make sure the heater is turned off and that the thermostat dial is set to maximum

(clockwise, as far as it will go). Now plug into an earthed, correctly functioning

220-240V / 50Hz socket. Only connect the heater to an earthed socket!

 Turn the heater on by pushing the on/off switch to ‘on’ (I pushed in). The heater

will now begin to disseminate hot air.

 When the space has reached the desired temperature, turn the thermostat dial

anticlockwise slowly until you hear a click. In this position, the thermostat will

maintain the current temperature by turning the heater on and off for a top-up, if

necessary. For higher temperatures, turn the thermostat dial clockwise, for lower

temperatures anticlockwise.

 To switch off, click the ON / OFF-switch to off. The heater switches off. Unplug.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eurom E-Convect Metal in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 1,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eurom E-Convect Metal Manual

Product: