701883
18
Zoom out
Zoom in
Previous page
1/48
Next page
18
Free-standing (as a portable heater):
Attach the feet supplied to the underside of the heater (see picture):
Turn the heater upside down. Place a blanket (or something similar) under the
heater to prevent damage! Remove the short screw on the left and right which is
located by the foot, see diagram.
Place the feet on their place on the bottom of the heater. This will ensure that the
threaded holes will align correctly.
Securely attach the feet to the heater using the 2 x 2 short self-tapping screws.
Return the heater to the upright position.
Make sure a working heater is always placed on a solid, flat and horizontal
surface. Deep-pile carpeting is unsuitable!
Mounted (secured to a wall):
Choose a solid, flat and completely vertical wall made of non-flammable and non-
melting material on which to mount the heater (i.e. no wood, synthetic materials, etc!)
Decide where you want to mount the heater. Make sure that the heater has
sufficient space around it at all times and that no inflammable materials are
located nearby (see also safety instructions). Do not place the heater behind a
door! The heater’s underside needs to be at least 5 cm and max. 10 cm above
the floor, the sides at least 20 cm from the side walls and the top at least 100 cm
from the ceiling, ceiling beams, etcetera.
Mount the suspension frame fully
vertically to the wall using the 4 large
screws and plugs. To do this, mark off
the positions of the bottom screws (in
the 'key hole opening'). Drill these
holes, insert plugs, screw in 2 screws
until they protrude 5 mm, hook the
frame onto them and allow it to drop
until the screws have fallen as far as
possible in the narrow part.
Now mark off the position for the top
two screws. Remove the frame, drill
both top hole and insert plugs.
Now replace the frame and tighten it
firmly against the wall using the top
screws. Now also tighten the bottom
screws.
Now hook the heater into the frame, see illustration. Finally, check that the frame
and the heater are fixed firmly.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom E-Convect defrost 400 - tot 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom E-Convect defrost 400 - tot 2018 in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info