26
Cleaning the filter
Extract the filter holder.
Use a vacuum cleaner or tap the filter lightly for easy
cleaning. If the filter is particularly dirty, use warm water
(max. 40°C) with a small amount of a mild detergent.
Make sure the filter is completely dry before replacing.
Do not expose the filter to sunlight.
Click the filter firmly back into the holder
Never use the appliance without a filter!
Cleaning the water tank
When the water tank is dirty, clean it with cold or lukewarm water. Never use liquid, paraffin,
abrasive cleaning agents, chemically impregnated cloths, abrasive cloths or other cleansing
fluids. This can damage the tank and cause leaks.
Storage
If not use the unit for an extended period of time:
Switch the unit off, unplug and tidy AC cord.
Completely empty the water tank and wipe it clean.
Clean the filter.
Drain any water in the device carefully. Remove the plug at the back of the device, at the
bottom. Don’t forget to push the plug back into the hole afterwards. Otherwise, there may be
a leak when you use the device again.
Cover the unit and store it in a cool and dry place, where it will not receive direct sunlight.
Trouble shooting
The unit does not operate:
Is the unit plugged in?
Is the house electricity on?
Is the room temperature below 5°C or above 35°C? If so, then it is out of the working range of
the unit.
Check the water tank is positioned properly in the unit and it is not full.
Make sure the air inlet and outlet are not obstructed.
Is the water tank well placed
The unit seems to do little:
Is the filter dusty, contaminated ?
Is the air intake or outlet blocked up?
Is the room humidity already quite low?
Are too many windows or doors open?
Is there something in the room producing lots of humidity?
