Manual Eurom DryBest 20 (page 15 of 36) (English, German, Dutch, French)

582454

Zoom out

Zoom in

1/36

Initial operation

1. Insert the plug into an appropriate socket, in accordance with the specifications on the

type plate. Only connect the appliance to an earthed socket! (DryBest 10: the "comp"

lamp (7) flashes, DryBest 20 The Power lamp (1) flashes).

2. Press the ON/OFF button (A); you will hear the compressor and the fan start up (the

"comp" lamp c.q. the “power” lamp will now light up continuously). The appliance will

start working. The display will show the air humidity in the space. By pressing the

ON/OFF button again, you will switch the appliance off (the "comp" lamp c.q. ‘power’

lamp will flash again).

3. Open the air outlet and set the airflow direction.

4. Using the "Higher" and "Lower" buttons (D&E), you can now set the required air humidity

between 30% and 90% (at intervals of 5%). The display will show the set air humidity for

a few seconds, afterwards the current air humidity will be shown. Once the required level

has been reached (± 2%), the compressor will stop, the fan will stop 3 minutes later. If the

air humidity rises once more to more than 3% above the set value, the appliance will start

again. The compressor has a time lag of at least 3 minutes protection time between

stopping and starting.

If you set the air humidity with the "Lower" button to "Co", the appliance will operate

continuously.

5. Using the Timer button (B), you can set starting and stopping times for the appliance. To

do this, press the Timer button (B); lamp (2) will light up. If you do this while the appliance

is not in operation (but with the plug in the socket), you will set the starting time; if you do

this while the appliance is in operation, you will set the stopping time. The number of

hours set will appear on the display. Each time you press the "Timer" button, an hour will

be added (setting from 1 to 24 hours). You can cancel the timer setting by setting the

time to 0 (0 comes after 24). The time setting is "forgotten" when you switch the

appliance off manually, but is kept in memory if the appliance stops because the

reservoir is full or during the thawing process.

6. DryBest 20: Pressing the fan speed button changes the fan speed from high to low and

back. The lamp indicates the operational capacity.

7. DryBest 20: Pressing the clean dryer button will continually dehumidify the appliance at a

high fan speed.

8. Make sure that you then remove the plug from the socket after use.

Drainage

While the water tank is full, the compressor will stop for self-protection and the water full

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eurom DryBest 20 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eurom DryBest 20 Manual

Product: