633102
18
Zoom out
Zoom in
Previous page
1/36
Next page
18
If the cooling function is used for a while, internal ice may form in the Cool Perfect. You will
notice a drop in the unit’s effectiveness as a result. To resolve this situation, switch the unit off
and leave for a while so that the ice can melt. The fan can also be switched on at the highest
setting without cooling.
When the desired cooling or heating temperature has been reached the Cool Perfect will
continue to ventilate, but the compressor will stop.
MAINTENANCE
Always switch the unit off and remove the plug from the socket before carrying out maintenance.
Regular cleaning is vital in order to keep the Cool Perfect in good working order!
The air filters are located behind the grills on the sides of the device. They can be taken out
easily by pulling them forward and then removing them. You clean them by carefully using the
brush attachment on your vacuum cleaner. If they are extremely dirty you may wash them with
diluted soapy water. Allow them to dry thoroughly in the shadow before re-installing them. Never
use the device without filters!
The radiators behind the filters can be carefully cleaned with the brush attachment of your
vacuum cleaner.
The housing can be removed if necessary and cleaned with a damp (not wet!) cloth and a mild
cleaning agent. Do not use paraffin or chemical cleaning agents! Dry afterwards with a soft cloth.
Storage Ensure that the interior of the device is also completely dry before you tidy up at the end
of the season.
PROTECTION
The Cool Perfect is fitted with an overheating safeguard that switches the unit off if it overheats. If
this should occur, you must remove the plug from the socket and leave to Cool Perfect to cool for
at least 30 minutes. Remove the cause of overheating - has the device been (partially) covered?
Is it too close to a wall or another obstacle, preventing it sucking in or dispelling sufficient air?
You can then use the device normally again but keep an eye on it for the first 30 minutes to
ensure there are no further problems. If the device is showing signs of problems or the
overheating recurs, even though there is no obvious assignable cause, ask your supplier or a
recognised electrician to check/repair the unit.
PROBLEMS AND SOLUTIONS
The display will help diagnose what is wrong in certain circumstances.
It will provide the following information code
E0 Short circuit in temperature sensor and printed circuit board. Contact your supplier for
repairs under guarantee.
E2 / E4 The tank is full or the button and cap is not secured properly. Remove the button and
cap from the drainage point on the underside of the unit and allow water to drain away.
Make sure that button and cap are replaced correctly.
DISPOSAL
When the Cool Perfect eventually comes to the end of its useful life and must be
disposed of, it must not be removed with ordinary household waste. Take it to a
special collection point organised by your local council.
Remove the batteries before doing so!
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom CoolPerfect 120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom CoolPerfect 120 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eurom CoolPerfect 120

Eurom CoolPerfect 120 User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info