Manual Eurom Convector panel de luxe (page 21 of 44) (English, German, Dutch, French)

591295

Zoom out

Zoom in

1/44

Using for the first time and Operation

1. Control light ‘heater on’

2. Control light ‘low output’

3. Control light ‘high output’

4. Control light heating

5. Thermostat symbol

6. Button for selecting low/high output

7. Activation button

8. Display

9. Timer symbol

10. ‘Higher’ button

11. ‘Lower’ button

12. Main switch

 Check to make sure the main switch is set to O (off).

 Check that the heater is stable and upright, in line with instructions.

 Now insert the plug into the 220/240V socket.

 Set the main switch to I (on). The control light ‘heater on’ (POWER) lights up.

 Now press the activation button (7). The display will show room temperature and

the set output (LO=low, HI=high).

 At the factory, the thermostat is set to 35°C, the timer to 00.00.

Setting temperature

 Press the activation button again; the display will show a blinking ‘35’ and ‘°C’.

 Press the ‘higher’ or ‘lower’ button to set the desired temperature: every time you

press the button, the set temperature will increase/decrease by 1 degree. The

temperature can be set between 5 and 45°C. Once the desired temperate

appears on the display, you can stop. The set temperature will blink for 5 seconds

on the display, then the room temperature will be displayed again. The thermostat

is now set and the thermostat symbol (°C) will be lit up. Once the heater begins to

heat, the Heating control light (4) will light up; it goes out when the heater shuts

down.

Setting timer

 Press on the activation button twice. The display will blink ‘0' (or the set hours)

and the timer symbol.

 Press the ‘higher’ or ‘lower’ button to set the length of time you would like the unit

to work: every time you press the button, the set time will increase/decrease by 1

hour. The time can be set from 0 to 24 hours. Once the desired time appears on

the display, you can stop. The set time will blink for 5 seconds on the display,

then the room temperature will be displayed again. The timer is now set and the

heater will start to work. The timer symbol remains lit up for the set period. Once

the set period is up, the heater will switch off (without providing a signal).

 The set period can be amended while the heater is on by pressing twice on the

activation button and repeating the procedure. The heater then forgets the old

setting and applies the newly programmed time.

Selecting output

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Convector panel de luxe in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eurom Convector panel de luxe Manual

Product: