Manual Eurom Convect 2000E (page 30 of 84) (English, German, Dutch, French, Swedish)

702467

Zoom out

Zoom in

1/84

 Position the feet on the bottom so that the screw holes line up.

 Use the supplied self-tapping screws (2x2) to firmly attach the feet to the

heater.

 Turn the heater back over.

 Make sure that when in operation, the heater is always positioned on a firm,

level, horizontal surface. Never place it on plush carpet.

 Unroll the electric cable fully and plug the plug into a suitable, grounded 220-

240V outlet. Only plug in the heater into a grounded outlet! The standby

indicator light (1) will light up. To avoid overload, check that no other equipment

is connected to the same group.

Use and Operation

1. Standby indicator light

2. 750W power

3. 1250W power

2+3 2000W power

4. Heating Working Indicator

5. Timer

6. LED display

7. Function button

8. Standby button

 Press the standby button (8). The display shows the temperature setting.

 Turn the function button (7) to set the temperature

 Press the function button (7) to set the power. The power lights will light up, if

light is lit up, the heater is operating at 750W, if light is lit up the heater

is operating at 1250W, if both are lit up then the heater is operating at

2000W.

 By turning the function button (7), you can set the desired temperature higher

or lower. The device has a thermostat and will heat up until the set temperature

is reached. After that, it will stay at the set temperature. Once the temperature

drops 2°, it automatically switches back on.

 Attention: the heater saves the set temperature and choice of power; next time

you turn on the heater, the heater will start with the last thermostat setting and

choice of power you used.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Convect 2000E in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.

The manual is 0,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eurom Convect 2000E Manual

Product: