474860
11
Zoom out
Zoom in
Previous page
1/28
Next page
11
INSTALLATION AND CONNECTION
Remove the packaging materials and keep out of the reach of children. After removing packaging,
check device for damage or any evidence that may point to a defect/failure. If in doubt, do not use
the device but refer to your supplier for checks/repairs.
Generally the fire will be placed against a wall. Place the heater on a sturdy, flat surface. The
aspiration grilles are located on the bottom; make sure they are never blocked! So do not place the
fire on high-pile carpets and never on soft surfaces like mattresses, cushions or blankets.
Choose a suitable location for the fireplace, at least one metre from all obstructions, walls and
flammable materials (see safety instructions) and in the vicinity of a 16 Amp (at least) fused,
earthed electrical socket (protected by a 30 mA earth leakage circuit breaker).
OPERATING
Check that the details on the data plate correspond to those of the electrical supply which you wish
to use for the fireplace. Do not use the same connection for any other equipment.
The control switches are located behind the metal panel on the front of the heater. Pull out the
panel and you will find three control switches:
By pressing the bottom switches (I depressed) you will make the following happen:
Switch 1: switch on the power supply to the heater and the flame effect (without
heating) (O depressed is OFF - I depressed is ON).
Switches 1+2: switch on 1000 Watt heating, with flame effect
Switches 1+2+3: switch on 2000 Watt heating, with flame effect
Check whether switch 1 is set to OFF (O depressed)
Connect the plug to an earthed power outlet.
Press switch 1 and, depending on what you want, switches 2 and 3 to start using the heater.
Switch off the heater by resetting all switches to the OFF position. Remove the plug from the power
outlet; do this whenever the heater is not in use!
Note: If you use the fire in a room with very little background noise, you may some noise caused by the
flame effect. This is normal and no reason for concern.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom Barcelona at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Barcelona in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info